[PATCH] ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box

[maxime.ripard@free-electrons.com (Maxime Ripard)]

On Tue, Jun 02, 2015 at 08:32:59PM +0200, Hans de Goede wrote:
> Hi,
> 
> On 06/02/2015 05:58 PM, Maxime Ripard wrote:
> >On Mon, Jun 01, 2015 at 05:02:59PM +0200, Hans de Goede wrote:
> >>The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using
> >>the same dts for both models. Unfortunately this does not work for the otg
> >>controller, on the M9 this is routed to a micro-usb connector on the outside,
> >>while as on the A1000G-quad it is connected to an usb to sata bridge
> >>(which is not populated on the M9 pcb).
> >>
> >>This commit adds a new dts for the Mele-A1000G-quad to allow using
> >>different otg controller settings on the 2 boards.
> >>
> >>Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> >>---
> >>  arch/arm/boot/dts/Makefile                                        | 1 +
> >>  arch/arm/boot/dts/{sun6i-a31-m9.dts => sun6i-a31-a1000g-quad.dts} | 4 ++--
> >
> >Didn't we say that we were trying to set the vendor name in the DTs
> >now, at least for the new ones?
> 
> I think we said that Paul would write a proposal to standardize
> naming for future boards, but that never materialized.
> 
> >I can fix this and apply it if it's ok for you.
> 
> I'm fine with throwing -mele- in there, or not, what ever you
> prefer.

Ok, applied and fixed the name.

This is probably going to be the last patch pulled for 4.2, unless
something important shows up in the next few days.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150602/8cf8a62b/attachment.sig>