From: shawnguo@kernel.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL v2 3/4] ARM: imx: device tree changes for 4.2
Date: Thu, 4 Jun 2015 10:39:26 +0800 [thread overview]
Message-ID: <20150604023926.GA24623@dragon> (raw)
Changes since v1:
- Rebase to only share imx7d clock ID header with imx/dt branch
- Add one patch correcting imx6dl gpt compatible string
The following changes since commit 0ed4668a5fafa922f450fca4b3431610a21626c5:
dt-bindings: add imx7d clock ID definitions (2015-06-03 14:41:29 +0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-4.2
for you to fetch changes up to 4e415ed8143f7f26f448e932a2d1b52ddc6ecbcd:
ARM: dts: imx6dl: add imx6dl gpt specific compatible string (2015-06-03 17:04:53 +0800)
----------------------------------------------------------------
The i.MX device tree changes for 4.2:
- Add device tree for i.MX7D SoC and imx7d-sdb board
- New i.MX6 board support: Armadeus Systems APF6, Gateworks GW5510,
and aristainetos2 boards
- Change LVDS to use simple-panel for nitrogen6x and sabrelite boards
- Add Wifi/Bluetooth devices support for cubox-i board
- Remove unused regulators and correct OTG roles setting for
imx6sl-warp board
- Add I2C support for imx23-olinuxino board
- Move imx6qdl HDMI device to a better place
- Add power-domain for imx6qdl CODA device
----------------------------------------------------------------
Cory Tusar (1):
ARM: dts: vf610: Nomenclature fixup for PTC12 pin used in RMII mode.
Eric Nelson (2):
ARM: dts: nitrogen6x: use simple-panel instead of display-timings for LVDS0
ARM: dts: sabrelite: use simple-panel instead of display-timings for LVDS0
Fabio Estevam (7):
ARM: dts: hummingboard: Remove unneeded 'fsl,mode' property
ARM: dts: imx6qdl-hummingboard: Add PCIe support
ARM: dts: imx6sl-warp: Remove unused regulator
ARM: dts: imx6sl-warp: Remove USB regulators
ARM: dts: imx6sl-warp: Fix OTG roles
ARM: dts: cubox-i: add support for Broadcom Wifi/Bluetooth devices
ARM: dts: cubox-i/hummingboard: Fix the license text
Frank Li (4):
ARM: dts: add pinfunc include file to support imx7d
Document: dt: binding: imx: update document for imx7d support
ARM: dts: add imx7d soc dtsi file
ARM: dts: add imx7d-sdb support
Harald Geyer (2):
ARM: dts: imx23: Add i2c support
ARM: dts: imx23-olinuxino: Add i2c support
Heiko Schocher (1):
ARM: dts: imx6: add DT for aristainetos2 board
Lucas Stach (1):
ARM: dts: imx6qdl: move HDMI controller to right location in DT
Philipp Zabel (1):
ARM: dts: imx6qdl: Add power-domain phandle to CODA device node
Shawn Guo (1):
ARM: dts: imx6dl: add imx6dl gpt specific compatible string
S?bastien Szymanski (1):
ARM: dts: Armadeus Systems APF6 family support (i.MX6)
Thomas Niederpr?m (1):
ARM: mxs: fix in tree users of ssd1306
Tim Harvey (1):
ARM: dts: Gateworks GW5510 support (i.MX6)
.../devicetree/bindings/clock/imx7d-clock.txt | 13 +
.../bindings/pinctrl/fsl,imx7d-pinctrl.txt | 27 +
arch/arm/boot/dts/Makefile | 8 +
arch/arm/boot/dts/imx23-olinuxino.dts | 6 +
arch/arm/boot/dts/imx23.dtsi | 40 +-
arch/arm/boot/dts/imx28-cfa10036.dts | 3 +
arch/arm/boot/dts/imx6dl-apf6dev.dts | 60 ++
arch/arm/boot/dts/imx6dl-aristainetos2_4.dts | 159 +++
arch/arm/boot/dts/imx6dl-aristainetos2_7.dts | 97 ++
arch/arm/boot/dts/imx6dl-cubox-i.dts | 5 +-
arch/arm/boot/dts/imx6dl-gw551x.dts | 55 ++
arch/arm/boot/dts/imx6dl-hummingboard.dts | 5 +-
arch/arm/boot/dts/imx6dl.dtsi | 4 +
arch/arm/boot/dts/imx6q-apf6dev.dts | 64 ++
arch/arm/boot/dts/imx6q-cubox-i.dts | 5 +-
arch/arm/boot/dts/imx6q-gw551x.dts | 55 ++
arch/arm/boot/dts/imx6q-hummingboard.dts | 5 +-
arch/arm/boot/dts/imx6qdl-apf6.dtsi | 158 +++
arch/arm/boot/dts/imx6qdl-apf6dev.dtsi | 479 +++++++++
arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi | 633 ++++++++++++
arch/arm/boot/dts/imx6qdl-cubox-i.dtsi | 5 +-
arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 314 ++++++
arch/arm/boot/dts/imx6qdl-hummingboard.dtsi | 19 +-
arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi | 5 +-
arch/arm/boot/dts/imx6qdl-microsom.dtsi | 108 +-
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 30 +-
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 30 +-
arch/arm/boot/dts/imx6qdl.dtsi | 57 +-
arch/arm/boot/dts/imx6sl-warp.dts | 39 +-
arch/arm/boot/dts/imx7d-pinfunc.h | 1038 ++++++++++++++++++++
arch/arm/boot/dts/imx7d-sdb.dts | 408 ++++++++
arch/arm/boot/dts/imx7d.dtsi | 486 +++++++++
arch/arm/boot/dts/vf-colibri.dtsi | 2 +-
arch/arm/boot/dts/vf610-cosmic.dts | 2 +-
arch/arm/boot/dts/vf610-pinfunc.h | 2 +-
arch/arm/boot/dts/vf610-twr.dts | 2 +-
36 files changed, 4307 insertions(+), 121 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/imx7d-clock.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
create mode 100644 arch/arm/boot/dts/imx6dl-apf6dev.dts
create mode 100644 arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
create mode 100644 arch/arm/boot/dts/imx6dl-aristainetos2_7.dts
create mode 100644 arch/arm/boot/dts/imx6dl-gw551x.dts
create mode 100644 arch/arm/boot/dts/imx6q-apf6dev.dts
create mode 100644 arch/arm/boot/dts/imx6q-gw551x.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-apf6.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-gw551x.dtsi
create mode 100644 arch/arm/boot/dts/imx7d-pinfunc.h
create mode 100644 arch/arm/boot/dts/imx7d-sdb.dts
create mode 100644 arch/arm/boot/dts/imx7d.dtsi
next reply other threads:[~2015-06-04 2:39 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-04 2:39 Shawn Guo [this message]
2015-06-11 0:02 ` [GIT PULL v2 3/4] ARM: imx: device tree changes for 4.2 Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150604023926.GA24623@dragon \
--to=shawnguo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).