[PATCH v4] Thermal cleanups and hardware trip points

[s.hauer@pengutronix.de (Sascha Hauer)]

Eduardo, Rui,

Any feedback to this series?

Thanks
  Sascha

On Wed, May 20, 2015 at 03:20:30PM +0200, Sascha Hauer wrote:
> This series adds support for hardware trip points. It picks up earlier
> work from Mikko Perttunen. Mikko implemented hardware trip points as part
> of the device tree support. It was suggested back then to move the
> functionality to the thermal core instead of putting more code into the
> device tree support. This series does exactly that.
> 
> The majority of the patches are cleanups and fixes. Patch 11 introduces
> hardware tracked trip points and finally a driver for the Mediatek
> thermal controller is introduced as the first user.
> 
> All comments welcome
> 
> Changes since v3:
> - Fix some missing function type changes in int3400_thermal.c,
>   processor_thermal_device.c, kirkwood_thermal.c and exynos_tmu.c
> - Add better description for set_trips callback
> - update the interrupt triggers also when the trip points change
> - Add missing MODULE_* tags
> - Broaden temperature range in the Mediatek driver so that we can be sure
>   the measured temperatures are really out of the desired range
> 
> Changes since v2:
> - Add Mediatek thermal controller driver as first user for hardware trip
>   points
> 
> Changes since v1:
> - Use int instead of unsigned long consistently for temperatures
> - Instead of misfixing the emulation code add a comment how the
>   code is meant
> - Add doc entry for .set_trips callback
> - initialize prev_low_trip/prev_high_trip properly
> - get tz->lock before calling thermal_zone_set_trips()
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |