linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 02/17] leds: port locomo leds driver to new locomo core
Date: Tue, 9 Jun 2015 12:11:30 +0100	[thread overview]
Message-ID: <20150609111130.GT2982@x1> (raw)
In-Reply-To: <CALT56yMkpXqurNw9xQeEBTdH5UTsrmSHTx1jbWXTb8zSWwDD6Q@mail.gmail.com>

On Tue, 09 Jun 2015, Dmitry Eremin-Solenikov wrote:

> 2015-06-09 9:57 GMT+03:00 Lee Jones <lee.jones@linaro.org>:
> > On Mon, 08 Jun 2015, Dmitry Eremin-Solenikov wrote:
> >
> >> Adapt locomo leds driver to new locomo core setup.
> >>
> >> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
> >> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
> >
> > This is missing Bryan's Ack.
> 
> Jacek is listed as a co-maintainer of the LEDS subsystem, so I assumed
> that his acked-by is enough.

Ah, this is new.

Congratulations Jacek.

Ignore me then.

> >> ---
> >>  drivers/leds/Kconfig       |   2 +-
> >>  drivers/leds/leds-locomo.c | 117 +++++++++++++++++++++++----------------------
> >>  2 files changed, 61 insertions(+), 58 deletions(-)
> >>
> >> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> >> index 966b960..d086aac 100644
> >> --- a/drivers/leds/Kconfig
> >> +++ b/drivers/leds/Kconfig
> >> @@ -79,7 +79,7 @@ config LEDS_LM3642
> >>  config LEDS_LOCOMO
> >>       tristate "LED Support for Locomo device"
> >>       depends on LEDS_CLASS
> >> -     depends on SHARP_LOCOMO
> >> +     depends on MFD_LOCOMO
> >>       help
> >>         This option enables support for the LEDs on Sharp Locomo.
> >>         Zaurus models SL-5500 and SL-5600.
> >> diff --git a/drivers/leds/leds-locomo.c b/drivers/leds/leds-locomo.c
> >> index 80ba048..a4286e9 100644
> >> --- a/drivers/leds/leds-locomo.c
> >> +++ b/drivers/leds/leds-locomo.c
> >> @@ -9,89 +9,92 @@
> >>   */
> >>
> >>  #include <linux/kernel.h>
> >> -#include <linux/init.h>
> >> -#include <linux/module.h>
> >> -#include <linux/device.h>
> >>  #include <linux/leds.h>
> >> +#include <linux/mfd/locomo.h>
> >> +#include <linux/module.h>
> >> +#include <linux/platform_device.h>
> >> +#include <linux/regmap.h>
> >>
> >> -#include <mach/hardware.h>
> >> -#include <asm/hardware/locomo.h>
> >> +struct locomo_led {
> >> +     struct led_classdev led;
> >> +     struct regmap *regmap;
> >> +     unsigned int reg;
> >> +};
> >>
> >>  static void locomoled_brightness_set(struct led_classdev *led_cdev,
> >> -                             enum led_brightness value, int offset)
> >> -{
> >> -     struct locomo_dev *locomo_dev = LOCOMO_DEV(led_cdev->dev->parent);
> >> -     unsigned long flags;
> >> -
> >> -     local_irq_save(flags);
> >> -     if (value)
> >> -             locomo_writel(LOCOMO_LPT_TOFH, locomo_dev->mapbase + offset);
> >> -     else
> >> -             locomo_writel(LOCOMO_LPT_TOFL, locomo_dev->mapbase + offset);
> >> -     local_irq_restore(flags);
> >> -}
> >> -
> >> -static void locomoled_brightness_set0(struct led_classdev *led_cdev,
> >>                               enum led_brightness value)
> >>  {
> >> -     locomoled_brightness_set(led_cdev, value, LOCOMO_LPT0);
> >> +     struct locomo_led *led = container_of(led_cdev, struct locomo_led, led);
> >> +
> >> +     regmap_write(led->regmap, led->reg,
> >> +                     value ? LOCOMO_LPT_TOFH : LOCOMO_LPT_TOFL);
> >>  }
> >>
> >> -static void locomoled_brightness_set1(struct led_classdev *led_cdev,
> >> -                             enum led_brightness value)
> >> +static int locomo_led_register(
> >> +             struct device *dev,
> >> +             struct locomo_led *led,
> >> +             const char *name,
> >> +             const char *trigger,
> >> +             struct regmap *regmap,
> >> +             unsigned int reg)
> >>  {
> >> -     locomoled_brightness_set(led_cdev, value, LOCOMO_LPT1);
> >> +     led->led.name = name;
> >> +     led->led.flags = LED_CORE_SUSPENDRESUME;
> >> +     led->led.default_trigger = trigger;
> >> +     led->led.brightness_set = locomoled_brightness_set;
> >> +     led->regmap = regmap;
> >> +     led->reg = reg;
> >> +
> >> +     return devm_led_classdev_register(dev, &led->led);
> >>  }
> >>
> >> -static struct led_classdev locomo_led0 = {
> >> -     .name                   = "locomo:amber:charge",
> >> -     .default_trigger        = "main-battery-charging",
> >> -     .brightness_set         = locomoled_brightness_set0,
> >> -};
> >> -
> >> -static struct led_classdev locomo_led1 = {
> >> -     .name                   = "locomo:green:mail",
> >> -     .default_trigger        = "nand-disk",
> >> -     .brightness_set         = locomoled_brightness_set1,
> >> -};
> >> -
> >> -static int locomoled_probe(struct locomo_dev *ldev)
> >> +static int locomoled_probe(struct platform_device *pdev)
> >>  {
> >>       int ret;
> >> -
> >> -     ret = led_classdev_register(&ldev->dev, &locomo_led0);
> >> +     struct locomo_led *leds;
> >> +     struct regmap *regmap;
> >> +
> >> +     leds = devm_kzalloc(&pdev->dev, 2 * sizeof(*leds), GFP_KERNEL);
> >> +     if (!leds)
> >> +             return -ENOMEM;
> >> +
> >> +     regmap = dev_get_regmap(pdev->dev.parent, NULL);
> >> +     if (!regmap)
> >> +             return -ENODEV;
> >> +
> >> +     ret = locomo_led_register(
> >> +                     &pdev->dev,
> >> +                     leds,
> >> +                     "locomo:amber:charge",
> >> +                     "main-battery-charging",
> >> +                     regmap,
> >> +                     LOCOMO_LPT0);
> >>       if (ret < 0)
> >>               return ret;
> >>
> >> -     ret = led_classdev_register(&ldev->dev, &locomo_led1);
> >> +     ret = locomo_led_register(
> >> +                     &pdev->dev,
> >> +                     leds + 1,
> >> +                     "locomo:green:mail",
> >> +                     "mmc0",
> >> +                     regmap,
> >> +                     LOCOMO_LPT1);
> >>       if (ret < 0)
> >> -             led_classdev_unregister(&locomo_led0);
> >> -
> >> -     return ret;
> >> -}
> >> +             return ret;
> >>
> >> -static int locomoled_remove(struct locomo_dev *dev)
> >> -{
> >> -     led_classdev_unregister(&locomo_led0);
> >> -     led_classdev_unregister(&locomo_led1);
> >>       return 0;
> >>  }
> >>
> >> -static struct locomo_driver locomoled_driver = {
> >> -     .drv = {
> >> -             .name = "locomoled"
> >> +static struct platform_driver locomoled_driver = {
> >> +     .driver = {
> >> +             .name = "locomo-led"
> >>       },
> >> -     .devid  = LOCOMO_DEVID_LED,
> >>       .probe  = locomoled_probe,
> >> -     .remove = locomoled_remove,
> >>  };
> >>
> >> -static int __init locomoled_init(void)
> >> -{
> >> -     return locomo_driver_register(&locomoled_driver);
> >> -}
> >> -module_init(locomoled_init);
> >> +module_platform_driver(locomoled_driver);
> >>
> >>  MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>");
> >>  MODULE_DESCRIPTION("Locomo LED driver");
> >>  MODULE_LICENSE("GPL");
> >> +MODULE_ALIAS("platform:locomo-led");
> >
> 
> 
> 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

  reply	other threads:[~2015-06-09 11:11 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-08 20:56 [PATCH v5 00/17] new LoCoMo driver set Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 01/17] mfd: add new driver for Sharp LoCoMo Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 02/17] leds: port locomo leds driver to new locomo core Dmitry Eremin-Solenikov
2015-06-09  6:57   ` Lee Jones
2015-06-09  8:08     ` Dmitry Eremin-Solenikov
2015-06-09 11:11       ` Lee Jones [this message]
2015-06-09 11:35         ` Jacek Anaszewski
2015-06-09 18:51           ` Lee Jones
2015-06-15 18:43       ` Bryan Wu
2015-06-08 20:56 ` [PATCH v5 03/17] input: convert LoCoMo keyboard driver to use " Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 04/17] input: locomokbd: differentiate between two Enter keys Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 05/17] input: make LoCoMo keyboard driver support both poodle and collie Dmitry Eremin-Solenikov
2015-06-14 15:11   ` Russell King - ARM Linux
2015-06-14 16:26     ` Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 06/17] video: backlight: add new locomo backlight driver Dmitry Eremin-Solenikov
2015-06-14 15:13   ` Russell King - ARM Linux
2015-06-14 16:17     ` Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 07/17] video: lcd: add LoCoMo LCD driver Dmitry Eremin-Solenikov
2015-06-14 15:18   ` Russell King - ARM Linux
2015-06-14 16:28     ` Dmitry Eremin-Solenikov
2015-06-14 17:16       ` Russell King - ARM Linux
2015-06-08 20:56 ` [PATCH v5 08/17] gpio: port LoCoMo gpio support from old driver Dmitry Eremin-Solenikov
2015-06-14 15:27   ` Russell King - ARM Linux
2016-05-11  8:34     ` Linus Walleij
2015-06-08 20:56 ` [PATCH v5 09/17] gpio: locomo: implement per-pin irq handling Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 10/17] i2c: add locomo i2c driver Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 11/17] ARM: sa1100: make collie use new locomo drivers Dmitry Eremin-Solenikov
2015-06-14 15:06   ` Russell King - ARM Linux
2015-06-08 20:56 ` [PATCH v5 12/17] ARM: sa1100: don't preallocate IRQ space for locomo Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 13/17] ASoC: pxa: poodle: make use of new locomo GPIO interface Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 14/17] ARM: pxa: poodle: use new LoCoMo driver Dmitry Eremin-Solenikov
2015-06-14 15:08   ` Russell King - ARM Linux
2015-06-08 20:56 ` [PATCH v5 15/17] ARM: pxa: poodle: don't preallocate IRQ space for locomo Dmitry Eremin-Solenikov
2015-06-08 20:56 ` [PATCH v5 16/17] video: backlight: drop old locomo bl/lcd driver Dmitry Eremin-Solenikov
2015-06-09  6:55   ` Lee Jones
2015-06-08 20:56 ` [PATCH v5 17/17] ARM: drop old LoCoMo driver Dmitry Eremin-Solenikov
2015-06-14 13:16 ` [PATCH v5 00/17] new LoCoMo driver set Dmitry Eremin-Solenikov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150609111130.GT2982@x1 \
    --to=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).