From mboxrd@z Thu Jan 1 00:00:00 1970 From: boris.brezillon@free-electrons.com (Boris Brezillon) Date: Wed, 17 Jun 2015 16:36:01 +0200 Subject: [PATCH] clk: at91: trivial: typo in peripheral clock description In-Reply-To: <1434547371-12123-1-git-send-email-nicolas.ferre@atmel.com> References: <1434547371-12123-1-git-send-email-nicolas.ferre@atmel.com> Message-ID: <20150617163601.213e9e67@bbrezillon> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, 17 Jun 2015 15:22:51 +0200 Nicolas Ferre wrote: > Signed-off-by: Nicolas Ferre Acked-by: Boris Brezillon > --- > Documentation/devicetree/bindings/clock/at91-clock.txt | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt > index 7a4d4926f44e..5ba6450693b9 100644 > --- a/Documentation/devicetree/bindings/clock/at91-clock.txt > +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt > @@ -248,7 +248,7 @@ Required properties for peripheral clocks: > - #address-cells : shall be 1 (reg is used to encode clk id). > - clocks : shall be the master clock phandle. > e.g. clocks = <&mck>; > -- name: device tree node describing a specific system clock. > +- name: device tree node describing a specific peripheral clock. > * #clock-cells : from common clock binding; shall be set to 0. > * reg: peripheral id. See Atmel's datasheets to get a full > list of peripheral ids. -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com