From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/4] mfd: axp20x: Add missing registers, and mark more registers volatile
Date: Wed, 24 Jun 2015 12:19:04 +0100 [thread overview]
Message-ID: <20150624111904.GG15013@x1> (raw)
In-Reply-To: <1434211748-25572-3-git-send-email-hdegoede@redhat.com>
On Sat, 13 Jun 2015, Hans de Goede wrote:
> From: Bruno Pr?mont <bonbons@linux-vserver.org>
>
> Add an extra set of registers which is necessary tu support the PMICs
> battery charger function, and mark registers which contain status bits,
> gpio status, and adc readings as volatile.
>
> Cc: Bruno Pr?mont <bonbons@linux-vserver.org>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> Changes in v2:
> -Add a AXP20X_OCV_MAX define
> ---
> drivers/mfd/axp20x.c | 8 +++++++-
> include/linux/mfd/axp20x.h | 6 ++++++
> 2 files changed, 13 insertions(+), 1 deletion(-)
Patch looks good, but you're missing Bruno's SoB.
> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> index 6df9155..f9a3c2d 100644
> --- a/drivers/mfd/axp20x.c
> +++ b/drivers/mfd/axp20x.c
> @@ -39,10 +39,16 @@ static const char * const axp20x_model_names[] = {
> static const struct regmap_range axp20x_writeable_ranges[] = {
> regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
> regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES),
> + regmap_reg_range(AXP20X_RDC_H, AXP20X_OCV(15)),
> };
>
> static const struct regmap_range axp20x_volatile_ranges[] = {
> + regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP20X_USB_OTG_STATUS),
> + regmap_reg_range(AXP20X_CHRG_CTRL1, AXP20X_CHRG_CTRL2),
> regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE),
> + regmap_reg_range(AXP20X_ACIN_V_ADC_H, AXP20X_IPSOUT_V_HIGH_L),
> + regmap_reg_range(AXP20X_GPIO20_SS, AXP20X_GPIO3_CTRL),
> + regmap_reg_range(AXP20X_FG_RES, AXP20X_RDC_L),
> };
>
> static const struct regmap_access_table axp20x_writeable_table = {
> @@ -159,7 +165,7 @@ static const struct regmap_config axp20x_regmap_config = {
> .val_bits = 8,
> .wr_table = &axp20x_writeable_table,
> .volatile_table = &axp20x_volatile_table,
> - .max_register = AXP20X_FG_RES,
> + .max_register = AXP20X_OCV(AXP20X_OCV_MAX),
> .cache_type = REGCACHE_RBTREE,
> };
>
> diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
> index 5275423..6d8b39a 100644
> --- a/include/linux/mfd/axp20x.h
> +++ b/include/linux/mfd/axp20x.h
> @@ -151,6 +151,12 @@ enum {
> #define AXP20X_CC_CTRL 0xb8
> #define AXP20X_FG_RES 0xb9
>
> +/* OCV */
> +#define AXP20X_RDC_H 0xba
> +#define AXP20X_RDC_L 0xbb
> +#define AXP20X_OCV(m) (0xc0 + (m))
> +#define AXP20X_OCV_MAX 0xf
> +
> /* AXP22X specific registers */
> #define AXP22X_BATLOW_THRES1 0xe6
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2015-06-24 11:19 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-13 16:09 [PATCH v2 0/4] mfd/power: axp20x-usb-power driver Hans de Goede
2015-06-13 16:09 ` [PATCH v2 1/4] ARM: dts: Add binding documentation for AXP20x pmic usb power supply Hans de Goede
2015-06-13 16:09 ` [PATCH v2 2/4] mfd: axp20x: Add missing registers, and mark more registers volatile Hans de Goede
2015-06-24 11:19 ` Lee Jones [this message]
2015-06-13 16:09 ` [PATCH v2 3/4] mfd: axp20x: Add a cell for the usb power_supply part of the axp20x PMICs Hans de Goede
2015-06-24 11:23 ` Lee Jones
2015-06-24 15:04 ` [linux-sunxi] " Hans de Goede
2015-06-25 8:51 ` Lee Jones
2015-06-13 16:09 ` [PATCH v2 4/4] power: Add an axp20x-usb-power driver Hans de Goede
2015-06-24 11:25 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150624111904.GG15013@x1 \
--to=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).