[PATCH-v4 1/3] mfd: 88pm800: Add device tree support

[lee.jones@linaro.org (Lee Jones)]

On Thu, 25 Jun 2015, Vaibhav Hiremath wrote:
> On Thursday 25 June 2015 03:49 PM, Lee Jones wrote:
> >On Thu, 25 Jun 2015, Vaibhav Hiremath wrote:
> >
> >>Add DT support to the 88pm800 driver, along with compatible
> >>field for it's sub-devices (rtc, onkey and regulator)
> >>
> >>Signed-off-by: Chao Xie <chao.xie@marvell.com>
> >>Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
> >>---
> >>  drivers/mfd/88pm800.c | 23 +++++++++++++++++++++++
> >>  1 file changed, 23 insertions(+)
> >>
> >>diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c
> >>index 841717a..40fd014 100644
> >>--- a/drivers/mfd/88pm800.c
> >>+++ b/drivers/mfd/88pm800.c
> >>@@ -27,6 +27,7 @@
> >>  #include <linux/mfd/core.h>
> >>  #include <linux/mfd/88pm80x.h>
> >>  #include <linux/slab.h>
> >>+#include <linux/of_device.h>
> >>
> >>  /* Interrupt Registers */
> >>  #define PM800_INT_STATUS1		(0x05)
> >>@@ -121,6 +122,11 @@ static const struct i2c_device_id pm80x_id_table[] = {
> >>  };
> >>  MODULE_DEVICE_TABLE(i2c, pm80x_id_table);
> >>
> >>+static const struct of_device_id pm80x_of_match_table[] = {
> >>+	{ .compatible = "marvell,88pm800", },
> >>+	{},
> >>+};
> >>+
> >>  static struct resource rtc_resources[] = {
> >>  	{
> >>  	 .name = "88pm80x-rtc",
> >>@@ -133,6 +139,7 @@ static struct resource rtc_resources[] = {
> >>  static struct mfd_cell rtc_devs[] = {
> >>  	{
> >>  	 .name = "88pm80x-rtc",
> >>+	 .of_compatible = "marvell,88pm80x-rtc",
> >>  	 .num_resources = ARRAY_SIZE(rtc_resources),
> >>  	 .resources = &rtc_resources[0],
> >>  	 .id = -1,
> >>@@ -151,6 +158,7 @@ static struct resource onkey_resources[] = {
> >>  static const struct mfd_cell onkey_devs[] = {
> >>  	{
> >>  	 .name = "88pm80x-onkey",
> >>+	 .of_compatible = "marvell,88pm80x-onkey",
> >>  	 .num_resources = 1,
> >>  	 .resources = &onkey_resources[0],
> >>  	 .id = -1,
> >>@@ -160,6 +168,7 @@ static const struct mfd_cell onkey_devs[] = {
> >>  static const struct mfd_cell regulator_devs[] = {
> >>  	{
> >>  	 .name = "88pm80x-regulator",
> >>+	 .of_compatible = "marvell,88pm80x-regulator",
> >>  	 .id = -1,
> >>  	},
> >>  };
> >>@@ -544,8 +553,21 @@ static int pm800_probe(struct i2c_client *client,
> >>  	int ret = 0;
> >>  	struct pm80x_chip *chip;
> >>  	struct pm80x_platform_data *pdata = dev_get_platdata(&client->dev);
> >>+	struct device_node *np = client->dev.of_node;
> >>  	struct pm80x_subchip *subchip;
> >>
> >>+	if (!pdata && !np) {
> >>+		dev_err(&client->dev,
> >>+			"pm80x requires platform data or of_node\n");
> >>+		return -EINVAL;
> >>+	}
> >>+
> >>+	if (!pdata) {
> >>+		pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
> >>+		if (!pdata)
> >>+			return -ENOMEM;
> >>+	}
> >
> >Why have you allocated data for pdata, then done nothing with it?
> >
> 
> Not in this patch, but subsequent patches would use it.

Only provide it when you start using it please.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog