[PATCH v2 1/2] ARM: dts: add buffalo linkstation ls-wxl/wsxl

[andrew@lunn.ch (Andrew Lunn)]

On Mon, Jun 29, 2015 at 03:22:53PM +0200, Gregory CLEMENT wrote:
> Hi Roger,
> 
> On 22/06/2015 17:00, Roger Shimizu wrote:
> > Add dts file to support Buffalo Linkstation LS-WXL and LS-WSXL,
> > which are 2-bay NAS with 3.5" and 2.5" HDD respectively.
> > 
> > Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
> > Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
> 
> it seems that you addressed Andrew's remarks too, so
> 
> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
>
> However I will wait for Andrew's formal acked-by before applying it.

Thanks for the reminder:

Acked-by: Andrew Lunn <andrew@lunn.ch>

	  Andrew


> 
> Thanks,
> 
> Gregory
> > ---
> >  .../devicetree/bindings/arm/marvell,kirkwood.txt   |   1 +
> >  arch/arm/boot/dts/Makefile                         |   1 +
> >  arch/arm/boot/dts/kirkwood-lswxl.dts               | 301 +++++++++++++++++++++
> >  3 files changed, 303 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/kirkwood-lswxl.dts
> > 
> > diff --git a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
> > index 4f40ff3..b79212f 100644
> > --- a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
> > +++ b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
> > @@ -20,6 +20,7 @@ And in addition, the compatible shall be extended with the specific
> >  board. Currently known boards are:
> >  
> >  "buffalo,lschlv2"
> > +"buffalo,lswxl"
> >  "buffalo,lsxhl"
> >  "buffalo,lsxl"
> >  "dlink,dns-320"
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index a8bf702..b45c974 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -176,6 +176,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
> >  	kirkwood-km_kirkwood.dtb \
> >  	kirkwood-laplug.dtb \
> >  	kirkwood-lschlv2.dtb \
> > +	kirkwood-lswxl.dtb \
> >  	kirkwood-lsxhl.dtb \
> >  	kirkwood-mplcec4.dtb \
> >  	kirkwood-mv88f6281gtw-ge.dtb \
> > diff --git a/arch/arm/boot/dts/kirkwood-lswxl.dts b/arch/arm/boot/dts/kirkwood-lswxl.dts
> > new file mode 100644
> > index 0000000..f5db16a
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/kirkwood-lswxl.dts
> > @@ -0,0 +1,301 @@
> > +/*
> > + * Device Tree file for Buffalo Linkstation LS-WXL/WSXL
> > + *
> > + * Copyright (C) 2015, rogershimizu at gmail.com
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License
> > + * as published by the Free Software Foundation; either version
> > + * 2 of the License, or (at your option) any later version.
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "kirkwood.dtsi"
> > +#include "kirkwood-6281.dtsi"
> > +
> > +/ {
> > +	model = "Buffalo Linkstation LS-WXL/WSXL";
> > +	compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
> > +
> > +	memory { /* 128 MB */
> > +		device_type = "memory";
> > +		reg = <0x00000000 0x8000000>;
> > +	};
> > +
> > +	chosen {
> > +		bootargs = "console=ttyS0,115200n8 earlyprintk";
> > +		stdout-path = &uart0;
> > +	};
> > +
> > +	mbus {
> > +		pcie-controller {
> > +			status = "okay";
> > +			pcie at 1,0 {
> > +				status = "okay";
> > +			};
> > +		};
> > +	};
> > +
> > +	ocp at f1000000 {
> > +		pinctrl: pin-controller at 10000 {
> > +			pmx_power_hdd0: pmx-power-hdd0 {
> > +				marvell,pins = "mpp28";
> > +				marvell,function = "gpio";
> > +			};
> > +			pmx_power_hdd1: pmx-power-hdd1 {
> > +				marvell,pins = "mpp29";
> > +				marvell,function = "gpio";
> > +			};
> > +			pmx_usb_vbus: pmx-usb-vbus {
> > +				marvell,pins = "mpp37";
> > +				marvell,function = "gpio";
> > +			};
> > +			pmx_fan_high: pmx-fan-high {
> > +				marvell,pins = "mpp47";
> > +				marvell,function = "gpio";
> > +			};
> > +			pmx_fan_low: pmx-fan-low {
> > +				marvell,pins = "mpp48";
> > +				marvell,function = "gpio";
> > +			};
> > +			pmx_led_hdderr0: pmx-led-hdderr0 {
> > +				marvell,pins = "mpp8";
> > +				marvell,function = "gpio";
> > +			};
> > +			pmx_led_hdderr1: pmx-led-hdderr1 {
> > +				marvell,pins = "mpp46";
> > +				marvell,function = "gpio";
> > +			};
> > +			pmx_led_alarm: pmx-led-alarm {
> > +				marvell,pins = "mpp49";
> > +				marvell,function = "gpio";
> > +			};
> > +			pmx_led_function_red: pmx-led-function-red {
> > +				marvell,pins = "mpp34";
> > +				marvell,function = "gpio";
> > +			};
> > +			pmx_led_function_blue: pmx-led-function-blue {
> > +				marvell,pins = "mpp36";
> > +				marvell,function = "gpio";
> > +			};
> > +			pmx_led_info: pmx-led-info {
> > +				marvell,pins = "mpp38";
> > +				marvell,function = "gpio";
> > +			};
> > +			pmx_led_power: pmx-led-power {
> > +				marvell,pins = "mpp39";
> > +				marvell,function = "gpio";
> > +			};
> > +			pmx_fan_lock: pmx-fan-lock {
> > +				marvell,pins = "mpp40";
> > +				marvell,function = "gpio";
> > +			};
> > +			pmx_button_function: pmx-button-function {
> > +				marvell,pins = "mpp41";
> > +				marvell,function = "gpio";
> > +			};
> > +			pmx_power_switch: pmx-power-switch {
> > +				marvell,pins = "mpp42";
> > +				marvell,function = "gpio";
> > +			};
> > +			pmx_power_auto_switch: pmx-power-auto-switch {
> > +				marvell,pins = "mpp43";
> > +				marvell,function = "gpio";
> > +			};
> > +		};
> > +
> > +		serial at 12000 {
> > +			status = "okay";
> > +		};
> > +
> > +		sata at 80000 {
> > +			status = "okay";
> > +			nr-ports = <2>;
> > +		};
> > +
> > +		spi at 10600 {
> > +			status = "okay";
> > +
> > +			m25p40 at 0 {
> > +				#address-cells = <1>;
> > +				#size-cells = <1>;
> > +				compatible = "st,m25p40", "jedec,spi-nor";
> > +				reg = <0>;
> > +				spi-max-frequency = <25000000>;
> > +				mode = <0>;
> > +
> > +				partition at 0 {
> > +					reg = <0x0 0x60000>;
> > +					label = "uboot";
> > +					read-only;
> > +				};
> > +
> > +				partition at 60000 {
> > +					reg = <0x60000 0x10000>;
> > +					label = "dtb";
> > +					read-only;
> > +				};
> > +
> > +				partition at 70000 {
> > +					reg = <0x70000 0x10000>;
> > +					label = "uboot_env";
> > +				};
> > +			};
> > +		};
> > +	};
> > +
> > +	gpio_keys {
> > +		compatible = "gpio-keys";
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +		pinctrl-0 = <&pmx_button_function &pmx_power_switch
> > +			     &pmx_power_auto_switch>;
> > +		pinctrl-names = "default";
> > +
> > +		button at 1 {
> > +			label = "Function Button";
> > +			linux,code = <KEY_OPTION>;
> > +			gpios = <&gpio1 41 GPIO_ACTIVE_LOW>;
> > +		};
> > +
> > +		button at 2 {
> > +			label = "Power-on Switch";
> > +			linux,code = <KEY_RESERVED>;
> > +			linux,input-type = <5>;
> > +			gpios = <&gpio1 42 GPIO_ACTIVE_LOW>;
> > +		};
> > +
> > +		button at 3 {
> > +			label = "Power-auto Switch";
> > +			linux,code = <KEY_ESC>;
> > +			linux,input-type = <5>;
> > +			gpios = <&gpio1 43 GPIO_ACTIVE_LOW>;
> > +		};
> > +	};
> > +
> > +	gpio_leds {
> > +		compatible = "gpio-leds";
> > +		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
> > +			     &pmx_led_info &pmx_led_power
> > +			     &pmx_led_function_blue
> > +			     &pmx_led_hdderr0
> > +			     &pmx_led_hdderr1>;
> > +		pinctrl-names = "default";
> > +
> > +		led at 1 {
> > +			label = "lswxl:blue:func";
> > +			gpios = <&gpio1 36 GPIO_ACTIVE_LOW>;
> > +		};
> > +
> > +		led at 2 {
> > +			label = "lswxl:red:alarm";
> > +			gpios = <&gpio1 49 GPIO_ACTIVE_LOW>;
> > +		};
> > +
> > +		led at 3 {
> > +			label = "lswxl:amber:info";
> > +			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
> > +		};
> > +
> > +		led at 4 {
> > +			label = "lswxl:blue:power";
> > +			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
> > +		};
> > +
> > +		led at 5 {
> > +			label = "lswxl:red:func";
> > +			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
> > +			default-state = "keep";
> > +		};
> > +
> > +		led at 6 {
> > +			label = "lswxl:red:hdderr0";
> > +			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
> > +		};
> > +
> > +		led at 7 {
> > +			label = "lswxl:red:hdderr1";
> > +			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
> > +		};
> > +	};
> > +
> > +	gpio_fan {
> > +		compatible = "gpio-fan";
> > +		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
> > +		pinctrl-names = "default";
> > +
> > +		gpios = <&gpio0 47 GPIO_ACTIVE_LOW
> > +			 &gpio0 48 GPIO_ACTIVE_LOW>;
> > +
> > +		gpio-fan,speed-map = <0 3
> > +				1500 2
> > +				3250 1
> > +				5000 0>;
> > +
> > +		alarm-gpios = <&gpio1 49 GPIO_ACTIVE_HIGH>;
> > +	};
> > +
> > +	restart_poweroff {
> > +		compatible = "restart-poweroff";
> > +	};
> > +
> > +	regulators {
> > +		compatible = "simple-bus";
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
> > +		pinctrl-names = "default";
> > +
> > +		usb_power: regulator at 1 {
> > +			compatible = "regulator-fixed";
> > +			reg = <1>;
> > +			regulator-name = "USB Power";
> > +			regulator-min-microvolt = <5000000>;
> > +			regulator-max-microvolt = <5000000>;
> > +			enable-active-high;
> > +			regulator-always-on;
> > +			regulator-boot-on;
> > +			gpio = <&gpio0 37 GPIO_ACTIVE_HIGH>;
> > +		};
> > +		hdd_power0: regulator at 2 {
> > +			compatible = "regulator-fixed";
> > +			reg = <2>;
> > +			regulator-name = "HDD0 Power";
> > +			regulator-min-microvolt = <5000000>;
> > +			regulator-max-microvolt = <5000000>;
> > +			enable-active-high;
> > +			regulator-always-on;
> > +			regulator-boot-on;
> > +			gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
> > +		};
> > +		hdd_power1: regulator at 3 {
> > +			compatible = "regulator-fixed";
> > +			reg = <3>;
> > +			regulator-name = "HDD1 Power";
> > +			regulator-min-microvolt = <5000000>;
> > +			regulator-max-microvolt = <5000000>;
> > +			enable-active-high;
> > +			regulator-always-on;
> > +			regulator-boot-on;
> > +			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
> > +		};
> > +	};
> > +};
> > +
> > +&mdio {
> > +	status = "okay";
> > +
> > +	ethphy1: ethernet-phy at 8 {
> > +		device_type = "ethernet-phy";
> > +		reg = <8>;
> > +	};
> > +};
> > +
> > +&eth1 {
> > +	status = "okay";
> > +
> > +	ethernet1-port at 0 {
> > +		phy-handle = <&ethphy1>;
> > +	};
> > +};
> > 
> 
> 
> -- 
> Gregory Clement, Free Electrons
> Kernel, drivers, real-time and embedded Linux
> development, consulting, training and support.
> http://free-electrons.com