From: alexandre.belloni@free-electrons.com (Alexandre Belloni)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 4/5] drivers/rtc/rtc-ds1307.c: Support optional wakeup interrupt source
Date: Wed, 1 Jul 2015 14:54:04 +0200 [thread overview]
Message-ID: <20150701125404.GR485@piout.net> (raw)
In-Reply-To: <20150624162654.GA29259@kahuna>
Hi,
On 24/06/2015 at 11:26:54 -0500, Nishanth Menon wrote :
> I am wrong here - code just returns 0 and ignores err. So, how about
> the following patch instead: (Alexandre, please do let me know if the
> entire series needs to be reposted):
Can you resend just that one as v3? I'll take it right away. Thanks!
> - improvement as suggested
> - Picked up previous acks
> - cleanup in probe does not need dev_pm_clear_wake_irq.
> -->8<---
> From 12367f8edffc25613f6f920d9bd7b69dfed57ce1 Mon Sep 17 00:00:00 2001
> From: Nishanth Menon <nm@ti.com>
> Date: Mon, 22 Jun 2015 14:13:19 -0500
> Subject: [PATCH V3] drivers/rtc/rtc-ds1307.c: Support optional wakeup interrupt
> source
>
> With the recent pinctrl-single changes, SoCs such as Texas
> Instrument's OMAP processors can treat wake-up events from deeper idle
> states as interrupts.
>
> Let's add support for the optional second interrupt for wake-up using
> the generic wakeirq support added in commit 4990d4fe327b ("PM /
> Wakeirq: Add automated device wake IRQ handling")
>
> Finally, to pass the wake-up interrupt in the dts file,
> interrupts-extended property needs to be passed.
>
> This is similar in approach to commit 2a0b965cfb6e ("serial: omap: Add
> support for optional wake-up") + ee83bd3b6483 ("serial: omap: Switch
> wake-up interrupt to generic wakeirq")
>
> Acked-by: Tony Lindgren <tony@atomide.com>
> Acked-by: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Nishanth Menon <nm@ti.com>
> ---
> drivers/rtc/rtc-ds1307.c | 36 +++++++++++++++++++++++++++++++++---
> 1 file changed, 33 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
> index b03880fc32b5..e16989c48a90 100644
> --- a/drivers/rtc/rtc-ds1307.c
> +++ b/drivers/rtc/rtc-ds1307.c
> @@ -15,6 +15,9 @@
> #include <linux/i2c.h>
> #include <linux/init.h>
> #include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_irq.h>
> +#include <linux/pm_wakeirq.h>
> #include <linux/rtc/ds1307.h>
> #include <linux/rtc.h>
> #include <linux/slab.h>
> @@ -114,6 +117,7 @@ struct ds1307 {
> #define HAS_ALARM 1 /* bit 1 == irq claimed */
> struct i2c_client *client;
> struct rtc_device *rtc;
> + int wakeirq;
> s32 (*read_block_data)(const struct i2c_client *client, u8 command,
> u8 length, u8 *values);
> s32 (*write_block_data)(const struct i2c_client *client, u8 command,
> @@ -1156,6 +1160,8 @@ read_rtc:
> }
>
> if (want_irq) {
> + struct device_node *node = client->dev.of_node;
> +
> err = devm_request_threaded_irq(&client->dev,
> client->irq, NULL, irq_handler,
> IRQF_SHARED | IRQF_ONESHOT,
> @@ -1163,13 +1169,34 @@ read_rtc:
> if (err) {
> client->irq = 0;
> dev_err(&client->dev, "unable to request IRQ!\n");
> - } else {
> + goto no_irq;
> + }
>
> - set_bit(HAS_ALARM, &ds1307->flags);
> - dev_dbg(&client->dev, "got IRQ %d\n", client->irq);
> + set_bit(HAS_ALARM, &ds1307->flags);
> + dev_dbg(&client->dev, "got IRQ %d\n", client->irq);
> +
> + /* Currently supported by OF code only! */
> + if (!node)
> + goto no_irq;
> +
> + err = of_irq_get(node, 1);
> + if (err <= 0) {
> + if (err == -EPROBE_DEFER)
> + goto exit;
> + goto no_irq;
> + }
> + ds1307->wakeirq = err;
> +
> + err = dev_pm_set_dedicated_wake_irq(&client->dev,
> + ds1307->wakeirq);
> + if (err) {
> + dev_err(&client->dev, "unable to setup wakeIRQ %d!\n",
> + err);
> + goto exit;
> }
> }
>
> +no_irq:
> if (chip->nvram_size) {
>
> ds1307->nvram = devm_kzalloc(&client->dev,
> @@ -1213,6 +1240,9 @@ static int ds1307_remove(struct i2c_client *client)
> {
> struct ds1307 *ds1307 = i2c_get_clientdata(client);
>
> + if (ds1307->wakeirq)
> + dev_pm_clear_wake_irq(&client->dev);
> +
> if (test_and_clear_bit(HAS_NVRAM, &ds1307->flags))
> sysfs_remove_bin_file(&client->dev.kobj, ds1307->nvram);
>
> --
> 1.7.9.5
>
> --
> Regards,
> Nishanth Menon
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
next prev parent reply other threads:[~2015-07-01 12:54 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-23 16:15 [PATCH V2 0/5] drivers/rtc/rtc-ds1307.c: Basic cleanups and support for wakeupirq Nishanth Menon
2015-06-23 16:15 ` [PATCH V2 1/5] drivers/rtc/rtc-ds1307.c: Convert to threaded IRQ Nishanth Menon
2015-06-23 16:15 ` [PATCH V2 2/5] drivers/rtc/rtc-ds1307.c: Switch to managed irq allocation Nishanth Menon
2015-06-23 16:15 ` [PATCH V2 3/5] drivers/rtc/rtc-ds1307.c: Sort the headers Nishanth Menon
2015-06-23 16:15 ` [PATCH V2 4/5] drivers/rtc/rtc-ds1307.c: Support optional wakeup interrupt source Nishanth Menon
2015-06-24 10:54 ` Tony Lindgren
2015-06-24 15:36 ` Grygorii Strashko
2015-06-24 16:07 ` Nishanth Menon
2015-06-24 16:25 ` Grygorii Strashko
2015-06-24 16:26 ` Nishanth Menon
2015-06-25 17:23 ` Grygorii Strashko
2015-07-01 12:54 ` Alexandre Belloni [this message]
2015-06-23 16:15 ` [TMP PATCH V2 5/5] ARM: dts: am57xx-beagle-x15: Add wakeup irq for mcp79410 Nishanth Menon
2015-06-24 14:34 ` [PATCH V2 0/5] drivers/rtc/rtc-ds1307.c: Basic cleanups and support for wakeupirq Felipe Balbi
2015-06-24 15:37 ` Grygorii Strashko
2015-07-02 22:47 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150701125404.GR485@piout.net \
--to=alexandre.belloni@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).