From mboxrd@z Thu Jan 1 00:00:00 1970 From: linux@arm.linux.org.uk (Russell King - ARM Linux) Date: Wed, 1 Jul 2015 15:53:54 +0100 Subject: Oops at boot after commit 965278dcb8ab... when using split memory region In-Reply-To: <20150701144612.GG2310@leverpostej> References: <20150701144612.GG2310@leverpostej> Message-ID: <20150701145354.GL7557@n2100.arm.linux.org.uk> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Jul 01, 2015 at 03:46:12PM +0100, Mark Rutland wrote: > On Wed, Jul 01, 2015 at 03:15:33PM +0100, jean-philippe francois wrote: > > Hi, > > Hi, > > > commit 965278dcb8ab0b1f666cc47937933c4be4aea48d, (ARM: 8356/1: mm: > > handle non-pmd-aligned end of RAM) causes my dm3730 based board to > > oops at boot when using a split memory description. > > The kernel command line parameter is : > > mem=55M at 0x80000000 mem=128M at 0x88000000 > > > > If the same board is booted without the mem argument, it boots to userspace. > > Thanks for the report. > > Javier reported a similar issue [1], which was somehow fixed by Laura's > patch to update the memblock limit [2,3]. > > I don't yet understand why, but if that works for you it would be an > interesting data point. > > > Below is the bootlog. > > Interesting. That blows up a lot later than I'd expect. I'll see if I > can reproduce the issue locally. Yes, I think we need to understand what's going on here, and what's causing these failures, rather than blindly applying a patch which seems to solve the problem. I'm not bothering investigating right now as it is far too hot and humid to concentrate today. -- FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up according to speedtest.net.