From mboxrd@z Thu Jan  1 00:00:00 1970
From: antoine.tenart@free-electrons.com (Antoine Tenart)
Date: Fri, 3 Jul 2015 11:20:28 +0200
Subject: [PATCH 1/4] phy: berlin-usb: fix divider for BG2CD
In-Reply-To: <5594C652.2020901@gmail.com>
References: <5594C652.2020901@gmail.com>
Message-ID: <20150703092028.GC5634@kwain>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Thomas,

On Thu, Jul 02, 2015 at 01:04:18AM -0400, Thomas Hebb wrote:
> The marvell,berlin2cd-usb-phy compatible incorrectly sets the PLL
> divider to BG2's value instead of BG2CD/BG2Q's. Change it to the right
> value.
> 
> Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
> Cc: stable at vger.kernel.org

Only this one is sent to stable? The BG2 won't be fixed in stable?

Antoine

> ---
>  drivers/phy/phy-berlin-usb.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/phy/phy-berlin-usb.c b/drivers/phy/phy-berlin-usb.c
> index c6fc95b..ab54f28 100644
> --- a/drivers/phy/phy-berlin-usb.c
> +++ b/drivers/phy/phy-berlin-usb.c
> @@ -106,8 +106,8 @@
>  static const u32 phy_berlin_pll_dividers[] = {
>  	/* Berlin 2 */
>  	CLK_REF_DIV(0xc) | FEEDBACK_CLK_DIV(0x54),
> -	/* Berlin 2CD */
> -	CLK_REF_DIV(0x6) | FEEDBACK_CLK_DIV(0x55),
> +	/* Berlin 2CD/Q */
> +	CLK_REF_DIV(0xc) | FEEDBACK_CLK_DIV(0x54),
>  };
>  
>  struct phy_berlin_usb_priv {
> -- 
> 2.4.4
> 

-- 
Antoine T?nart, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com