From mboxrd@z Thu Jan 1 00:00:00 1970 From: nicoleotsuka@gmail.com (Nicolin Chen) Date: Fri, 3 Jul 2015 10:44:05 -0700 Subject: [alsa-devel] [PATCH] ASoC: fsl-ssi: Fix bitclock calculation for master mode In-Reply-To: <1435919976-1667-1-git-send-email-jbe@pengutronix.de> References: <1435919976-1667-1-git-send-email-jbe@pengutronix.de> Message-ID: <20150703174404.GA9468@Asurada> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, Jul 03, 2015 at 12:39:36PM +0200, Juergen Borleis wrote: > According to the datasheet 'pm', 'psr' and 'div2' should never be all 0. > Since commit 541b03ad6cfe ("ASoC: fsl_ssi: Fix the incorrect limitation of > the bit clock rate") this can happen, because for some bitclock rates > 'pm' = 0 seems to be a valid choice but does not work due to hardware > restrictions. This results into a bad hardware behaviour (slow audio for > example). Feature tested on a i.MX25. > > Signed-off-by: Juergen Borleis Acked-by: Nicolin Chen Thank you! > --- > sound/soc/fsl/fsl_ssi.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c > index c7647e0..c0b940e 100644 > --- a/sound/soc/fsl/fsl_ssi.c > +++ b/sound/soc/fsl/fsl_ssi.c > @@ -633,7 +633,7 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream, > sub *= 100000; > do_div(sub, freq); > > - if (sub < savesub) { > + if (sub < savesub && !(i == 0 && psr == 0 && div2 == 0)) { > baudrate = tmprate; > savesub = sub; > pm = i; > -- > 2.1.4 > > _______________________________________________ > Alsa-devel mailing list > Alsa-devel at alsa-project.org > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel