From: drjones@redhat.com (Andrew Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] KVM: arm: rename pause into power_off
Date: Tue, 7 Jul 2015 15:36:29 +0200 [thread overview]
Message-ID: <20150707133629.GF3381@hawk.localdomain> (raw)
In-Reply-To: <1436186996-22528-2-git-send-email-eric.auger@linaro.org>
On Mon, Jul 06, 2015 at 02:49:55PM +0200, Eric Auger wrote:
> The kvm_vcpu_arch pause field is renamed into power_off to prepare
> for the introduction of a new pause field.
>
> Signed-off-by: Eric Auger <eric.auger@linaro.org>
>
> v4 -> v5:
> - fix compilation issue on arm64 (add power_off field in kvm_host.h)
> ---
> arch/arm/include/asm/kvm_host.h | 4 ++--
> arch/arm/kvm/arm.c | 10 +++++-----
> arch/arm/kvm/psci.c | 10 +++++-----
> arch/arm64/include/asm/kvm_host.h | 4 ++--
> 4 files changed, 14 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
> index e896d2c..304004d 100644
> --- a/arch/arm/include/asm/kvm_host.h
> +++ b/arch/arm/include/asm/kvm_host.h
> @@ -129,8 +129,8 @@ struct kvm_vcpu_arch {
> * here.
> */
>
> - /* Don't run the guest on this vcpu */
> - bool pause;
This patch should leave pause in. kvm_arch_vcpu_ioctl_set_mpstate still
references it, compilation is broken until the next patch comes.
> + /* vcpu power-off state */
> + bool power_off;
>
> /* IO related fields */
> struct kvm_decode mmio_decode;
> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
> index bcdf799..7537e68 100644
> --- a/arch/arm/kvm/arm.c
> +++ b/arch/arm/kvm/arm.c
> @@ -475,7 +475,7 @@ static void vcpu_pause(struct kvm_vcpu *vcpu)
> {
> wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu);
>
> - wait_event_interruptible(*wq, !vcpu->arch.pause);
> + wait_event_interruptible(*wq, !vcpu->arch.power_off);
Leaving pause in would allow this to already be
+ wait_event_interruptible(*wq, ((!vcpu->arch.power_off) &&
+ (!vcpu->arch.pause)));
which feels better. The function name is vcpu_pause, so it's nice
to see state named 'pause' in there.
> }
>
> static int kvm_vcpu_initialized(struct kvm_vcpu *vcpu)
> @@ -525,7 +525,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
>
> update_vttbr(vcpu->kvm);
>
> - if (vcpu->arch.pause)
> + if (vcpu->arch.power_off)
> vcpu_pause(vcpu);
>
> /*
> @@ -766,12 +766,12 @@ static int kvm_arch_vcpu_ioctl_vcpu_init(struct kvm_vcpu *vcpu,
> vcpu_reset_hcr(vcpu);
>
> /*
> - * Handle the "start in power-off" case by marking the VCPU as paused.
> + * Handle the "start in power-off" case.
> */
> if (test_bit(KVM_ARM_VCPU_POWER_OFF, vcpu->arch.features))
> - vcpu->arch.pause = true;
> + vcpu->arch.power_off = true;
> else
> - vcpu->arch.pause = false;
> + vcpu->arch.power_off = false;
>
> return 0;
> }
> diff --git a/arch/arm/kvm/psci.c b/arch/arm/kvm/psci.c
> index 4b94b51..134971a 100644
> --- a/arch/arm/kvm/psci.c
> +++ b/arch/arm/kvm/psci.c
> @@ -63,7 +63,7 @@ static unsigned long kvm_psci_vcpu_suspend(struct kvm_vcpu *vcpu)
>
> static void kvm_psci_vcpu_off(struct kvm_vcpu *vcpu)
> {
> - vcpu->arch.pause = true;
> + vcpu->arch.power_off = true;
> }
>
> static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
> @@ -87,7 +87,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
> */
> if (!vcpu)
> return PSCI_RET_INVALID_PARAMS;
> - if (!vcpu->arch.pause) {
> + if (!vcpu->arch.power_off) {
> if (kvm_psci_version(source_vcpu) != KVM_ARM_PSCI_0_1)
> return PSCI_RET_ALREADY_ON;
> else
> @@ -115,7 +115,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
> * the general puspose registers are undefined upon CPU_ON.
> */
> *vcpu_reg(vcpu, 0) = context_id;
> - vcpu->arch.pause = false;
> + vcpu->arch.power_off = false;
> smp_mb(); /* Make sure the above is visible */
>
> wq = kvm_arch_vcpu_wq(vcpu);
> @@ -152,7 +152,7 @@ static unsigned long kvm_psci_vcpu_affinity_info(struct kvm_vcpu *vcpu)
> kvm_for_each_vcpu(i, tmp, kvm) {
> mpidr = kvm_vcpu_get_mpidr_aff(tmp);
> if (((mpidr & target_affinity_mask) == target_affinity) &&
> - !tmp->arch.pause) {
> + !tmp->arch.power_off) {
> return PSCI_0_2_AFFINITY_LEVEL_ON;
> }
> }
> @@ -175,7 +175,7 @@ static void kvm_prepare_system_event(struct kvm_vcpu *vcpu, u32 type)
> * re-initialized.
> */
> kvm_for_each_vcpu(i, tmp, vcpu->kvm) {
> - tmp->arch.pause = true;
> + tmp->arch.power_off = true;
> kvm_vcpu_kick(tmp);
> }
>
> diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
> index 2709db2..009da6b 100644
> --- a/arch/arm64/include/asm/kvm_host.h
> +++ b/arch/arm64/include/asm/kvm_host.h
> @@ -122,8 +122,8 @@ struct kvm_vcpu_arch {
> * here.
> */
>
> - /* Don't run the guest */
> - bool pause;
> + /* vcpu power-off state */
> + bool power_off;
>
> /* IO related fields */
> struct kvm_decode mmio_decode;
> --
> 1.9.1
Thanks,
drew
next prev parent reply other threads:[~2015-07-07 13:36 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-06 12:49 [PATCH 0/2] KVM: arm/arm64: Guest synchronous halt/resume Eric Auger
2015-07-06 12:49 ` [PATCH 1/2] KVM: arm: rename pause into power_off Eric Auger
2015-07-07 13:36 ` Andrew Jones [this message]
2015-07-07 14:08 ` Eric Auger
2015-07-18 9:09 ` Christoffer Dall
2015-08-07 12:36 ` Eric Auger
2015-07-06 12:49 ` [PATCH 2/2] kvm: arm/arm64: implement kvm_arm_[halt,resume]_guest Eric Auger
2015-07-07 13:41 ` [PATCH 2/2] kvm: arm/arm64: implement kvm_arm_[halt, resume]_guest Andrew Jones
2015-07-07 14:10 ` Eric Auger
2015-07-18 9:18 ` Christoffer Dall
2015-08-07 12:56 ` Eric Auger
2015-08-07 16:17 ` Eric Auger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150707133629.GF3381@hawk.localdomain \
--to=drjones@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).