From: jszhang@marvell.com (Jisheng Zhang)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 3/3] arm: psci: add cpuidle_ops support
Date: Wed, 8 Jul 2015 14:46:29 +0800 [thread overview]
Message-ID: <20150708144629.147ebce5@xhacker> (raw)
In-Reply-To: <20150707142345.GG4379@red-moon>
Dear Lorenzo,
On Tue, 7 Jul 2015 15:23:45 +0100
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> wrote:
> On Sat, Jul 04, 2015 at 02:01:50PM +0100, Jisheng Zhang wrote:
> > This patch implement cpuidle_ops using psci, the code is stolen from
> > arm64. Now we can use cpuidle-arm.c for both arm and arm64.
>
> You mean cpuidle-arm.c with PSCI back-end. You will have to rewrite
> the commit log anyway since this patch will be significantly trimmed,
> see below.
Will do, thanks for the suggestion.
>
> > Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
> > ---
> > arch/arm/kernel/psci.c | 116 +++++++++++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 116 insertions(+)
> >
> > diff --git a/arch/arm/kernel/psci.c b/arch/arm/kernel/psci.c
> > index 7f6ff02..7bf744d 100644
> > --- a/arch/arm/kernel/psci.c
> > +++ b/arch/arm/kernel/psci.c
> > @@ -13,16 +13,132 @@
> > * Author: Will Deacon <will.deacon@arm.com>
> > */
> >
> > +#include <linux/cpuidle.h>
> > #include <linux/init.h>
> > #include <linux/smp.h>
> > #include <linux/of.h>
> > #include <linux/delay.h>
> > #include <linux/psci.h>
> > +#include <linux/slab.h>
> >
> > #include <uapi/linux/psci.h>
> >
> > +#include <asm/cpuidle.h>
> > #include <asm/psci.h>
> > #include <asm/smp_plat.h>
> > +#include <asm/suspend.h>
> > +
> > +#ifdef CONFIG_CPU_IDLE
> > +static bool psci_power_state_loses_context(u32 state)
> > +{
> > + return state & PSCI_0_2_POWER_STATE_TYPE_MASK;
> > +}
> > +
> > +static bool psci_power_state_is_valid(u32 state)
> > +{
> > + const u32 valid_mask = PSCI_0_2_POWER_STATE_ID_MASK |
> > + PSCI_0_2_POWER_STATE_TYPE_MASK |
> > + PSCI_0_2_POWER_STATE_AFFL_MASK;
> > +
> > + return !(state & ~valid_mask);
> > +}
>
> Already moved these helpers to drivers/firmware:
>
> http://lists.infradead.org/pipermail/linux-arm-kernel/2015-May/347355.html
>
> > +
> > +static DEFINE_PER_CPU_READ_MOSTLY(u32 *, psci_power_state);
> > +
> > +static int __init cpu_psci_cpu_init_idle(struct device_node *cpu_node,
> > + int cpu)
> > +{
> > + int i, ret, count = 0;
> > + u32 *psci_states;
> > + struct device_node *state_node;
> > +
> > + /*
> > + * If the PSCI cpu_suspend function hook has not been initialized
> > + * idle states must not be enabled, so bail out
> > + */
> > + if (!psci_ops.cpu_suspend)
> > + return -EOPNOTSUPP;
> > +
> > + /* Count idle states */
> > + while ((state_node = of_parse_phandle(cpu_node, "cpu-idle-states",
> > + count))) {
> > + count++;
> > + of_node_put(state_node);
> > + }
> > +
> > + if (!count)
> > + return -ENODEV;
> > +
> > + psci_states = kcalloc(count, sizeof(*psci_states), GFP_KERNEL);
> > + if (!psci_states)
> > + return -ENOMEM;
> > +
> > + for (i = 0; i < count; i++) {
> > + u32 state;
> > +
> > + state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
> > +
> > + ret = of_property_read_u32(state_node,
> > + "arm,psci-suspend-param",
> > + &state);
> > + if (ret) {
> > + pr_warn(" * %s missing arm,psci-suspend-param property\n",
> > + state_node->full_name);
> > + of_node_put(state_node);
> > + goto free_mem;
> > + }
> > +
> > + of_node_put(state_node);
> > + pr_warn("psci-power-state %#x index %d\n", state, i);
> > + if (!psci_power_state_is_valid(state)) {
> > + pr_warn("Invalid PSCI power state %#x\n", state);
> > + ret = -EINVAL;
> > + goto free_mem;
> > + }
> > + psci_states[i] = state;
> > + }
> > + /* Idle states parsed correctly, initialize per-cpu pointer */
> > + per_cpu(psci_power_state, cpu) = psci_states;
> > + return 0;
> > +
> > +free_mem:
> > + kfree(psci_states);
> > + return ret;
> > +}
> > +
> > +static int psci_suspend_finisher(unsigned long index)
> > +{
> > + u32 *state = __this_cpu_read(psci_power_state);
> > +
> > + return psci_ops.cpu_suspend(state[index - 1],
> > + virt_to_phys(cpu_resume));
> > +}
> > +
> > +static int cpu_psci_cpu_suspend(int cpu, unsigned long index)
> > +{
> > + int ret;
> > + u32 *state = __this_cpu_read(psci_power_state);
> > + /*
> > + * idle state index 0 corresponds to wfi, should never be called
> > + * from the cpu_suspend operations
> > + */
> > + if (WARN_ON_ONCE(!index))
> > + return -EINVAL;
> > +
> > + if (!psci_power_state_loses_context(state[index - 1]))
> > + ret = psci_ops.cpu_suspend(state[index - 1], 0);
> > + else
> > + ret = cpu_suspend(index, psci_suspend_finisher);
> > +
> > + return ret;
> > +}
>
> Code above is arch agnostic and should be moved out of arch/arm (and
> arm64).
Got it. the remaining issue is cpuidle_ops.suspend prototype. Does it make
sense to change it from
int (*suspend)(int cpu, unsigned long arg);
to
int (*suspend)(unsigned long arg);
It seems that the to-be-suspended cpu is always the calling cpu itself.
Anyway I won't change the prototype but make a simple glue instead in the next
for patch for review.
>
> Can you put together a patch to do it or you want me to do it ?
>
> > +static struct cpuidle_ops psci_cpuidle_ops __initdata = {
> > + .suspend = cpu_psci_cpu_suspend,
> > + .init = cpu_psci_cpu_init_idle,
> > +};
> > +CPUIDLE_METHOD_OF_DECLARE(psci_idle, "psci", &psci_cpuidle_ops);
> > +#endif
>
> This is fine and should stay in arch/arm.
Thanks a lot for the review and tips, I'll cook newer patches for review.
Thanks,
Jisheng
prev parent reply other threads:[~2015-07-08 6:46 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-04 13:01 [RFC PATCH 0/3] arm: psci: implement cpuidle_ops Jisheng Zhang
2015-07-04 13:01 ` [RFC PATCH 1/3] arm: psci: rename psci_smp.c to psci.c Jisheng Zhang
2015-07-06 9:06 ` Daniel Lezcano
2015-07-06 9:14 ` Jisheng Zhang
2015-07-04 13:01 ` [RFC PATCH 2/3] arm: psci: enable PSCI on UP systems Jisheng Zhang
2015-07-07 14:16 ` Lorenzo Pieralisi
2015-07-04 13:01 ` [RFC PATCH 3/3] arm: psci: add cpuidle_ops support Jisheng Zhang
2015-07-07 14:23 ` Lorenzo Pieralisi
2015-07-08 6:46 ` Jisheng Zhang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150708144629.147ebce5@xhacker \
--to=jszhang@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).