From mboxrd@z Thu Jan  1 00:00:00 1970
From: alexandre.belloni@free-electrons.com (Alexandre Belloni)
Date: Fri, 10 Jul 2015 07:56:58 +0200
Subject: [PATCH 1/2] power: reset: at91: add sama5d3 reset function
In-Reply-To: <20150710031438.GA27089@roeck-us.net>
References: <1436436947-11210-1-git-send-email-josh.wu@atmel.com>
 <20150709173747.GA32448@roeck-us.net> <559F2719.3060708@atmel.com>
 <20150710031438.GA27089@roeck-us.net>
Message-ID: <20150710055658.GZ3127@piout.net>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hi Guenter,

On 09/07/2015 at 20:14:38 -0700, Guenter Roeck wrote :
> > This patch introduces a new compatible string: "atmel,sama5d3-rstc" for the
> > reset driver of sama5d3 and later chips.
> > As in sama5d3 or later chips, we don't have to shutdown the DDR controller
> > before reset. Shutdown the DDR controller before reset is a workaround to
> > avoid DDR signal driving the bus, but since sama5d3 and later chips there is
> > no such a conflict.
> > That means:
> >   1. the sama5d3 reset function only need to write the rstc register and
> > return.
> >   2. for sama5d3, we can remove the code related with DDR controller as we
> > don't use it at all.
> > 
> Sorry, I don't get it. Doesn't that mean there are two distinct logical
> changes, which would ask for two separate patches ?

I would agree with Josh and I think that only one patch is needed. There
is only one change, the removal of the workaround for sama5d3 and later.

As the workaround is using a table of compatibles to remap the ram
controller and the one for sama5d3 is not used because it is not needed,
I think it makes sense to remove it in that same patch. The logical
change here is the removal of the workaround.

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com