linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: lina.iyer@linaro.org (Lina Iyer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/3] ARM: cpuidle: refine cpuidle_ops member's parameters.
Date: Fri, 10 Jul 2015 09:07:39 -0600	[thread overview]
Message-ID: <20150710150739.GB2049@linaro.org> (raw)
In-Reply-To: <20150709092848.GA26079@red-moon>

On Thu, Jul 09 2015 at 03:28 -0600, Lorenzo Pieralisi wrote:
>On Thu, Jul 09, 2015 at 09:43:04AM +0100, Jisheng Zhang wrote:
>> On Thu, 9 Jul 2015 16:31:24 +0800
>> Jisheng Zhang <jszhang@marvell.com> wrote:
>>
>> > As for the suspend member function, the to-be-suspended cpu is always
>> > the calling cpu itself, so the 'cpu' parameter may not be necessary, let
>> > driver get 'cpu' itself if need.
>> >
>> > As for the init member function, the device_node here may not be
>> > necessary either, because we can get the node via. of_get_cpu_node().
>>
>> This patch also changes drivers/soc/qcom/spm.c accordingly, but I have no
>> qcom platform, so I can't test it, just make sure it can pass kernel building.
>> Could anyone kindly help me to test?
>
>CC'ing Lina who should be able to help you test it.
>
Sure, will test and let you know.

-- Lina

>Thanks,
>Lorenzo
>
>> Thanks a lot,
>> Jisheng
>>
>> >
>> > Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
>> > ---
>> >  arch/arm/include/asm/cpuidle.h |  6 +++---
>> >  arch/arm/kernel/cpuidle.c      |  8 ++++----
>> >  drivers/soc/qcom/spm.c         | 17 ++++++++++++-----
>> >  3 files changed, 19 insertions(+), 12 deletions(-)
>> >
>> > diff --git a/arch/arm/include/asm/cpuidle.h b/arch/arm/include/asm/cpuidle.h
>> > index 0f84249..ca5dfe6 100644
>> > --- a/arch/arm/include/asm/cpuidle.h
>> > +++ b/arch/arm/include/asm/cpuidle.h
>> > @@ -30,8 +30,8 @@ static inline int arm_cpuidle_simple_enter(struct cpuidle_device *dev,
>> >  struct device_node;
>> >
>> >  struct cpuidle_ops {
>> > -	int (*suspend)(int cpu, unsigned long arg);
>> > -	int (*init)(struct device_node *, int cpu);
>> > +	int (*suspend)(unsigned long arg);
>> > +	int (*init)(unsigned int cpu);
>> >  };
>> >
>> >  struct of_cpuidle_method {
>> > @@ -46,6 +46,6 @@ struct of_cpuidle_method {
>> >
>> >  extern int arm_cpuidle_suspend(int index);
>> >
>> > -extern int arm_cpuidle_init(int cpu);
>> > +extern int arm_cpuidle_init(unsigned int cpu);
>> >
>> >  #endif
>> > diff --git a/arch/arm/kernel/cpuidle.c b/arch/arm/kernel/cpuidle.c
>> > index 318da33..7bc7bc6 100644
>> > --- a/arch/arm/kernel/cpuidle.c
>> > +++ b/arch/arm/kernel/cpuidle.c
>> > @@ -53,10 +53,10 @@ int arm_cpuidle_simple_enter(struct cpuidle_device *dev,
>> >  int arm_cpuidle_suspend(int index)
>> >  {
>> >  	int ret = -EOPNOTSUPP;
>> > -	int cpu = smp_processor_id();
>> > +	unsigned int cpu = smp_processor_id();
>> >
>> >  	if (cpuidle_ops[cpu].suspend)
>> > -		ret = cpuidle_ops[cpu].suspend(cpu, index);
>> > +		ret = cpuidle_ops[cpu].suspend(index);
>> >
>> >  	return ret;
>> >  }
>> > @@ -134,7 +134,7 @@ static int __init arm_cpuidle_read_ops(struct device_node *dn, int cpu)
>> >   *  -ENXIO if the HW reports a failure or a misconfiguration,
>> >   *  -ENOMEM if the HW report an memory allocation failure
>> >   */
>> > -int __init arm_cpuidle_init(int cpu)
>> > +int __init arm_cpuidle_init(unsigned int cpu)
>> >  {
>> >  	struct device_node *cpu_node = of_cpu_device_node_get(cpu);
>> >  	int ret;
>> > @@ -144,7 +144,7 @@ int __init arm_cpuidle_init(int cpu)
>> >
>> >  	ret = arm_cpuidle_read_ops(cpu_node, cpu);
>> >  	if (!ret && cpuidle_ops[cpu].init)
>> > -		ret = cpuidle_ops[cpu].init(cpu_node, cpu);
>> > +		ret = cpuidle_ops[cpu].init(cpu);
>> >
>> >  	of_node_put(cpu_node);
>> >
>> > diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c
>> > index b04b05a..1649ec3 100644
>> > --- a/drivers/soc/qcom/spm.c
>> > +++ b/drivers/soc/qcom/spm.c
>> > @@ -116,7 +116,7 @@ static const struct spm_reg_data spm_reg_8064_cpu = {
>> >
>> >  static DEFINE_PER_CPU(struct spm_driver_data *, cpu_spm_drv);
>> >
>> > -typedef int (*idle_fn)(int);
>> > +typedef int (*idle_fn)(void);
>> >  static DEFINE_PER_CPU(idle_fn*, qcom_idle_ops);
>> >
>> >  static inline void spm_register_write(struct spm_driver_data *drv,
>> > @@ -179,9 +179,10 @@ static int qcom_pm_collapse(unsigned long int unused)
>> >  	return -1;
>> >  }
>> >
>> > -static int qcom_cpu_spc(int cpu)
>> > +static int qcom_cpu_spc(void)
>> >  {
>> >  	int ret;
>> > +	int cpu = smp_processor_id();
>> >  	struct spm_driver_data *drv = per_cpu(cpu_spm_drv, cpu);
>> >
>> >  	spm_set_low_power_mode(drv, PM_SLEEP_MODE_SPC);
>> > @@ -197,9 +198,11 @@ static int qcom_cpu_spc(int cpu)
>> >  	return ret;
>> >  }
>> >
>> > -static int qcom_idle_enter(int cpu, unsigned long index)
>> > +static int qcom_idle_enter(unsigned long index)
>> >  {
>> > -	return per_cpu(qcom_idle_ops, cpu)[index](cpu);
>> > +	unsigned int cpu = smp_processor_id();
>> > +
>> > +	return per_cpu(qcom_idle_ops, cpu)[index]();
>> >  }
>> >
>> >  static const struct of_device_id qcom_idle_state_match[] __initconst = {
>> > @@ -207,7 +210,7 @@ static const struct of_device_id qcom_idle_state_match[] __initconst = {
>> >  	{ },
>> >  };
>> >
>> > -static int __init qcom_cpuidle_init(struct device_node *cpu_node, int cpu)
>> > +static int __init qcom_cpuidle_init(unsigned int cpu)
>> >  {
>> >  	const struct of_device_id *match_id;
>> >  	struct device_node *state_node;
>> > @@ -217,6 +220,10 @@ static int __init qcom_cpuidle_init(struct device_node *cpu_node, int cpu)
>> >  	idle_fn *fns;
>> >  	cpumask_t mask;
>> >  	bool use_scm_power_down = false;
>> > +	struct device_node *cpu_node = of_get_cpu_node(cpu, NULL);
>> > +
>> > +	if (!cpu_node)
>> > +		return -ENODEV;
>> >
>> >  	for (i = 0; ; i++) {
>> >  		state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
>>

  reply	other threads:[~2015-07-10 15:07 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-09  8:31 [PATCH v3 0/3] arm: kernel: implement cpuidle_ops with psci backend Jisheng Zhang
2015-07-09  8:31 ` [PATCH v3 1/3] firmware: psci: move cpu_suspend handling to generic code Jisheng Zhang
2015-07-09  8:31 ` [PATCH v3 2/3] ARM: cpuidle: refine cpuidle_ops member's parameters Jisheng Zhang
2015-07-09  8:43   ` Jisheng Zhang
2015-07-09  9:28     ` Lorenzo Pieralisi
2015-07-10 15:07       ` Lina Iyer [this message]
2015-07-10 17:37   ` Lina Iyer
2015-07-09  8:31 ` [PATCH v3 3/3] arm: kernel: implement cpuidle_ops with psci backend Jisheng Zhang
2015-07-14 10:34   ` Russell King - ARM Linux
2015-07-14 11:03     ` Lorenzo Pieralisi
2015-07-14 12:29       ` Russell King - ARM Linux
2015-07-14 14:55         ` Lorenzo Pieralisi
2015-07-14 20:41           ` Russell King - ARM Linux
2015-07-15 13:46             ` Lorenzo Pieralisi
2015-07-15 14:45               ` Russell King - ARM Linux
2015-07-15 15:40                 ` Lorenzo Pieralisi
2015-07-26 21:45                   ` Russell King - ARM Linux
2015-07-27  9:16                     ` Lorenzo Pieralisi
2015-07-27  9:45                       ` Russell King - ARM Linux
2015-07-27 10:01                         ` Lorenzo Pieralisi
2015-07-27 10:09                           ` Russell King - ARM Linux

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150710150739.GB2049@linaro.org \
    --to=lina.iyer@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).