[PATCH v3 0/3] ARM: OMAP2+: wkup_m3_rproc support patches

[tony@atomide.com (Tony Lindgren)]

* Dave Gerlach <d-gerlach@ti.com> [150709 12:53]:
> Tony,
> On 04/01/2015 02:47 PM, Dave Gerlach wrote:
> > This series adds the mach-omap2 code and DT nodes for v3 of the
> > wkup_m3_rproc driver submitted here [1]. pdata-quirks patch requires
> > the pdata added with patch 4 of the aforementioned series. Based on
> > previous discussion here [2], the wkup_m3 DT node has been moved as a
> > child of the l4_wkup as is done for l4_wkup components in Tero Kristo's
> > series "PRCM+SCM cleanup against 4.0-rc1" found here [3]. Because of that,
> > this series applies cleanly on top of that series in order to leverage the
> > l4_wkup parent node introduced there.
> > 
> > In addition to the move of the wkup_m3 node for am33xx, a new patch
> > has been added to introduce the wkup_m3 node in the same fashion for
> > am43xx as both SoCs use the same configuration. With this change
> > support was also added to pdata-quirks for passing reset handlers to
> > the driver for the am43xx binding as was already done for am33xx.
> > 
> > I have pushed a branch containing all patches for am335x suspend
> > here for a big picture view of how all patches fit together with
> > these wkup_m3_rproc series [4].
> > 
> > v2->v3:
> > -Change ti,am3353-wkup-m3 compat to ti,am3352-wkup-m3 to reflect
> >  binding documentation change
> > -Add ti,am4372-wkup-m3 node to am4372 SoC dt file
> > -Add am4372 support to pdata-quirks for reset handlers
> 
> Now that Ohad has sent a pull request for the wkup_m3_rproc driver [1] and it
> has been merged is it possible for this series with the DT nodes and pdata-quirk
> to get picked up? Let me know and I can rebase and resend if you'd like.

Yes this series looks good to me now, will queue for v4.3.

Regards,

Tony
 
> [1] https://lkml.org/lkml/2015/7/1/354
> 
> > 
> > Regards,
> > Dave
> > 
> > [1] https://www.mail-archive.com/linux-omap at vger.kernel.org/msg115869.html
> > [2] http://www.spinics.net/lists/linux-omap/msg116366.html
> > [3] http://www.spinics.net/lists/arm-kernel/msg409842.html
> > [4] https://github.com/dgerlach/linux-pm/tree/pm-v4.0-rc5-am335x-suspend
> > 
> > Dave Gerlach (1):
> >   ARM: OMAP2+: Use pdata-quirks for wkup_m3 reset management
> > 
> > Suman Anna (2):
> >   ARM: dts: AM33xx: Update and move wkup_m3 node to l4 node
> >   ARM: dts: AM4372: Add the wkupm3 rproc node
> > 
> >  arch/arm/boot/dts/am33xx.dtsi      | 17 +++++++++--------
> >  arch/arm/boot/dts/am4372.dtsi      |  9 +++++++++
> >  arch/arm/mach-omap2/pdata-quirks.c | 15 +++++++++++++++
> >  3 files changed, 33 insertions(+), 8 deletions(-)
> > 
>