From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] irqchip: omap-intc: improve IRQ handler
Date: Wed, 15 Jul 2015 01:15:42 -0700 [thread overview]
Message-ID: <20150715064923.GA17550@atomide.com> (raw)
In-Reply-To: <20150119213458.GK18552@atomide.com>
Felipe,
* Tony Lindgren <tony@atomide.com> [150119 13:41]:
> * Felipe Balbi <balbi@ti.com> [150102 10:50]:
> > as it turns out the current IRQ number will
> > *always* be available from SIR register which
> > renders the reads of PENDING registers as plain
> > unnecessary overhead.
> >
> > In order to catch any situation where SIR reads
> > as zero, we're adding a WARN() to turn it into
> > a very verbose error and users actually report
> > it.
> >
> > With this patch average running time of
> > omap_intc_handle_irq() reduced from about 28.5us
> > to 19.8us as measured by the kernel function
> > profiler.
> >
> > Tested with BeagleBoneBlack Rev A5C.
> >
> > Signed-off-by: Felipe Balbi <balbi@ti.com>
>
> Jason, looks like this is not showing up in Linux next. The
> same for the changes I did for dm81xx.
Can you please resend this to Jason? Looks like this
is still not merged.
Regards,
Tony
> > Before applying, it would be very nice to get reports
> > from other folks on different platforms, specially OMAP2/3
> > ones which I don't have (easy) access.
> >
> > drivers/irqchip/irq-omap-intc.c | 35 +++++------------------------------
> > 1 file changed, 5 insertions(+), 30 deletions(-)
> >
> > diff --git a/drivers/irqchip/irq-omap-intc.c b/drivers/irqchip/irq-omap-intc.c
> > index 28718d3..a2da6d5 100644
> > --- a/drivers/irqchip/irq-omap-intc.c
> > +++ b/drivers/irqchip/irq-omap-intc.c
> > @@ -315,37 +315,12 @@ static int __init omap_init_irq(u32 base, struct device_node *node)
> > static asmlinkage void __exception_irq_entry
> > omap_intc_handle_irq(struct pt_regs *regs)
> > {
> > - u32 irqnr = 0;
> > - int handled_irq = 0;
> > - int i;
> > -
> > - do {
> > - for (i = 0; i < omap_nr_pending; i++) {
> > - irqnr = intc_readl(INTC_PENDING_IRQ0 + (0x20 * i));
> > - if (irqnr)
> > - goto out;
> > - }
> > -
> > -out:
> > - if (!irqnr)
> > - break;
> > -
> > - irqnr = intc_readl(INTC_SIR);
> > - irqnr &= ACTIVEIRQ_MASK;
> > + u32 irqnr;
> >
> > - if (irqnr) {
> > - handle_domain_irq(domain, irqnr, regs);
> > - handled_irq = 1;
> > - }
> > - } while (irqnr);
> > -
> > - /*
> > - * If an irq is masked or deasserted while active, we will
> > - * keep ending up here with no irq handled. So remove it from
> > - * the INTC with an ack.
> > - */
> > - if (!handled_irq)
> > - omap_ack_irq(NULL);
> > + irqnr = intc_readl(INTC_SIR);
> > + irqnr &= ACTIVEIRQ_MASK;
> > + WARN(!irqnr, "Spuriour IRQ ?\n");
> > + handle_domain_irq(domain, irqnr, regs);
> > }
> >
> > void __init omap2_init_irq(void)
> > --
> > 2.2.0
> >
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-07-15 8:15 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-02 18:47 [PATCH] irqchip: omap-intc: improve IRQ handler Felipe Balbi
2015-01-02 21:32 ` Tony Lindgren
2015-01-02 21:39 ` Felipe Balbi
2015-01-02 22:18 ` [PATCH v2] " Felipe Balbi
2015-01-19 21:34 ` [PATCH] " Tony Lindgren
2015-07-15 8:15 ` Tony Lindgren [this message]
2015-07-15 12:36 ` Thomas Gleixner
2015-07-20 16:44 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150715064923.GA17550@atomide.com \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).