From mboxrd@z Thu Jan  1 00:00:00 1970
From: mark.rutland@arm.com (Mark Rutland)
Date: Wed, 15 Jul 2015 10:35:11 +0100
Subject: [RESEND PATCH v3] ARM: tegra124: pmu support
In-Reply-To: <1436808945-14524-1-git-send-email-khuey@kylehuey.com>
References: <1436808945-14524-1-git-send-email-khuey@kylehuey.com>
Message-ID: <20150715093511.GA10239@leverpostej>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Mon, Jul 13, 2015 at 06:35:45PM +0100, Kyle Huey wrote:
> This patch modifies the device tree for tegra124 based devices to enable
> the Cortex A15 PMU.  The interrupt numbers are taken from NVIDIA TRM
> DP-06905-001_v03p.  This patch was tested on a Jetson TK1.
> 
> Updated for proper ordering and to add interrupt-affinity values.
>
> Signed-off-by: Kyle Huey <khuey@kylehuey.com>

This looks sane to me, and as you've tested it the values seem to be
valid:

Acked-by: Mark Rutland <mark.rutland@arm.com>

Mark.

> ---
>  arch/arm/boot/dts/tegra124.dtsi | 17 +++++++++++++----
>  1 file changed, 13 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
> index 13cc7ca..de07d7e 100644
> --- a/arch/arm/boot/dts/tegra124.dtsi
> +++ b/arch/arm/boot/dts/tegra124.dtsi
> @@ -918,31 +918,40 @@
>  		#address-cells = <1>;
>  		#size-cells = <0>;
>  
> -		cpu at 0 {
> +		A15_0: cpu at 0 {
>  			device_type = "cpu";
>  			compatible = "arm,cortex-a15";
>  			reg = <0>;
>  		};
>  
> -		cpu at 1 {
> +		A15_1: cpu at 1 {
>  			device_type = "cpu";
>  			compatible = "arm,cortex-a15";
>  			reg = <1>;
>  		};
>  
> -		cpu at 2 {
> +		A15_2: cpu at 2 {
>  			device_type = "cpu";
>  			compatible = "arm,cortex-a15";
>  			reg = <2>;
>  		};
>  
> -		cpu at 3 {
> +		A15_3: cpu at 3 {
>  			device_type = "cpu";
>  			compatible = "arm,cortex-a15";
>  			reg = <3>;
>  		};
>  	};
>  
> +	pmu {
> +		compatible = "arm,cortex-a15-pmu";
> +		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-affinity = <&A15_0>, <&A15_1>, <&A15_2>, <&A15_3>;
> +	};
> +
>  	thermal-zones {
>  		cpu {
>  			polling-delay-passive = <1000>;
> -- 
> 1.9.1
>