From: christoffer.dall@linaro.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 12/18] KVM: ARM64: Add reset and access handlers for PMINTENSET_EL1 and PMINTENCLR_EL1 register
Date: Fri, 17 Jul 2015 16:56:24 +0200 [thread overview]
Message-ID: <20150717145624.GV14024@cbox> (raw)
In-Reply-To: <1436149068-3784-13-git-send-email-shannon.zhao@linaro.org>
On Mon, Jul 06, 2015 at 10:17:42AM +0800, shannon.zhao at linaro.org wrote:
> From: Shannon Zhao <shannon.zhao@linaro.org>
>
> Since the reset value of PMINTENSET_EL1 and PMINTENCLR_EL1 is UNKNOWN,
> use reset_unknown for its reset handler. Add access handler which
> emulates writing and reading PMINTENSET_EL1 or PMINTENCLR_EL1 register.
> When writing to PMINTENSET_EL1, set the interrupt flag true. While
> writing to PMINTENCLR_EL1, set the interrupt flag false. This flag will
> be useful for counter overflow interrupt.
>
> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
> ---
> arch/arm64/kvm/sys_regs.c | 56 +++++++++++++++++++++++++++++++++++++++++++++--
> include/kvm/arm_pmu.h | 4 ++++
> virt/kvm/arm/pmu.c | 28 ++++++++++++++++++++++++
> 3 files changed, 86 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
> index c14ec8d..cbc07b8 100644
> --- a/arch/arm64/kvm/sys_regs.c
> +++ b/arch/arm64/kvm/sys_regs.c
> @@ -444,6 +444,58 @@ static bool access_pmcntenclr(struct kvm_vcpu *vcpu,
> return true;
> }
>
> +/* PMINTENSET_EL1 accessor. */
> +static bool access_pmintenset(struct kvm_vcpu *vcpu,
> + const struct sys_reg_params *p,
> + const struct sys_reg_desc *r)
> +{
> + unsigned long val;
> +
> + if (p->is_write) {
> + val = *vcpu_reg(vcpu, p->Rt);
> + if (!p->is_aarch32)
> + vcpu_sys_reg(vcpu, r->reg) |= val;
> + else
> + vcpu_cp15(vcpu, r->reg) |= val & 0xffffffffUL;
> +
> + kvm_pmu_enable_interrupt(vcpu, val);
> + } else {
> + if (!p->is_aarch32)
> + val = vcpu_sys_reg(vcpu, r->reg);
> + else
> + val = vcpu_cp15(vcpu, r->reg);
> + *vcpu_reg(vcpu, p->Rt) = val;
> + }
> +
> + return true;
> +}
> +
> +/* PMINTENCLR_EL1 accessor. */
> +static bool access_pmintenclr(struct kvm_vcpu *vcpu,
> + const struct sys_reg_params *p,
> + const struct sys_reg_desc *r)
> +{
> + unsigned long val;
> +
> + if (p->is_write) {
> + val = *vcpu_reg(vcpu, p->Rt);
> + if (!p->is_aarch32)
> + vcpu_sys_reg(vcpu, r->reg) |= val;
> + else
> + vcpu_cp15(vcpu, r->reg) |= val & 0xffffffffUL;
> +
> + kvm_pmu_disable_interrupt(vcpu, val);
> + } else {
> + if (!p->is_aarch32)
> + val = vcpu_sys_reg(vcpu, r->reg);
> + else
> + val = vcpu_cp15(vcpu, r->reg);
> + *vcpu_reg(vcpu, p->Rt) = val;
> + }
Same comments as in the previous patch, but now I realize what you're
doing with the set/clear registers. These are not separate pieces of
state, but a single register, which are just accessed with two
interfaces, for set/clear patterns.
> +
> + return true;
> +}
> +
> /* Silly macro to expand the DBG{BCR,BVR,WVR,WCR}n_EL1 registers in one go */
> #define DBG_BCR_BVR_WCR_WVR_EL1(n) \
> /* DBGBVRn_EL1 */ \
> @@ -595,10 +647,10 @@ static const struct sys_reg_desc sys_reg_descs[] = {
>
> /* PMINTENSET_EL1 */
> { Op0(0b11), Op1(0b000), CRn(0b1001), CRm(0b1110), Op2(0b001),
> - trap_raz_wi },
> + access_pmintenset, reset_unknown, PMINTENSET_EL1 },
> /* PMINTENCLR_EL1 */
> { Op0(0b11), Op1(0b000), CRn(0b1001), CRm(0b1110), Op2(0b010),
> - trap_raz_wi },
> + access_pmintenclr, reset_unknown, PMINTENCLR_EL1 },
>
> /* MAIR_EL1 */
> { Op0(0b11), Op1(0b000), CRn(0b1010), CRm(0b0010), Op2(0b000),
> diff --git a/include/kvm/arm_pmu.h b/include/kvm/arm_pmu.h
> index 2cfd9be..dee8356 100644
> --- a/include/kvm/arm_pmu.h
> +++ b/include/kvm/arm_pmu.h
> @@ -51,6 +51,8 @@ unsigned long kvm_pmu_get_counter_value(struct kvm_vcpu *vcpu,
> unsigned long select_idx);
> void kvm_pmu_disable_counter(struct kvm_vcpu *vcpu, unsigned long val);
> void kvm_pmu_enable_counter(struct kvm_vcpu *vcpu, unsigned long val);
> +void kvm_pmu_disable_interrupt(struct kvm_vcpu *vcpu, unsigned long val);
> +void kvm_pmu_enable_interrupt(struct kvm_vcpu *vcpu, unsigned long val);
> void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, unsigned long data,
> unsigned long select_idx);
> void kvm_pmu_init(struct kvm_vcpu *vcpu);
> @@ -65,6 +67,8 @@ unsigned long kvm_pmu_get_counter_value(struct kvm_vcpu *vcpu,
> }
> void kvm_pmu_disable_counter(struct kvm_vcpu *vcpu, unsigned long val) {}
> void kvm_pmu_enable_counter(struct kvm_vcpu *vcpu, unsigned long val) {}
> +void kvm_pmu_disable_interrupt(struct kvm_vcpu *vcpu, unsigned long val) {}
> +void kvm_pmu_enable_interrupt(struct kvm_vcpu *vcpu, unsigned long val) {}
> void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, unsigned long data,
> unsigned long select_idx) {}
> static inline void kvm_pmu_init(struct kvm_vcpu *vcpu) {}
> diff --git a/virt/kvm/arm/pmu.c b/virt/kvm/arm/pmu.c
> index cf59998..7023ad5 100644
> --- a/virt/kvm/arm/pmu.c
> +++ b/virt/kvm/arm/pmu.c
> @@ -175,6 +175,34 @@ void kvm_pmu_disable_counter(struct kvm_vcpu *vcpu, unsigned long val)
> }
>
> /**
> + * kvm_pmu_enable_interrupt - enable selected PMU counter interrupt
> + * @vcpu: The vcpu pointer
> + * @val: the value guest writes to PMINTENSET_EL0 register
> + */
> +void kvm_pmu_enable_interrupt(struct kvm_vcpu *vcpu, unsigned long val)
> +{
> + int select_idx = find_first_bit(&val, 32);
also same as before.
> + struct kvm_pmu *pmu = &vcpu->arch.pmu;
> + struct kvm_pmc *pmc = &pmu->pmc[select_idx];
> +
> + pmc->interrupt = true;
ah, so this was interrupts enabled, I think this is better called
interrupt_enabled on the struct.
Thanks,
-Christoffer
> +}
> +
> +/**
> + * kvm_pmu_disable_interrupt - disable selected PMU counter interrupt
> + * @vcpu: The vcpu pointer
> + * @val: the value guest writes to PMINTENCLR_EL0 register
> + */
> +void kvm_pmu_disable_interrupt(struct kvm_vcpu *vcpu, unsigned long val)
> +{
> + int select_idx = find_first_bit(&val, 32);
> + struct kvm_pmu *pmu = &vcpu->arch.pmu;
> + struct kvm_pmc *pmc = &pmu->pmc[select_idx];
> +
> + pmc->interrupt = false;
> +}
> +
> +/**
> * kvm_pmu_find_hw_event - find hardware event
> * @pmu: The pmu pointer
> * @event_select: The number of selected event type
> --
> 2.1.0
>
next prev parent reply other threads:[~2015-07-17 14:56 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-06 2:17 [PATCH 00/18] KVM: ARM64: Add guest PMU support shannon.zhao at linaro.org
2015-07-06 2:17 ` [PATCH 01/18] ARM64: Move PMU register related defines to asm/pmu.h shannon.zhao at linaro.org
2015-07-08 17:18 ` Will Deacon
2015-07-06 2:17 ` [PATCH 02/18] KVM: ARM64: Add initial support for PMU shannon.zhao at linaro.org
2015-07-16 18:25 ` Christoffer Dall
2015-07-17 8:13 ` Shannon Zhao
2015-07-17 9:58 ` Christoffer Dall
2015-07-17 11:34 ` Shannon Zhao
2015-07-17 12:48 ` Christoffer Dall
2015-07-06 2:17 ` [PATCH 03/18] KVM: ARM64: Add offset defines for PMU registers shannon.zhao at linaro.org
2015-07-16 18:45 ` Christoffer Dall
2015-07-17 8:25 ` Shannon Zhao
2015-07-17 10:17 ` Christoffer Dall
2015-07-17 11:40 ` Shannon Zhao
2015-07-06 2:17 ` [PATCH 04/18] KVM: ARM64: Add reset and access handlers for PMCR_EL0 register shannon.zhao at linaro.org
2015-07-16 19:55 ` Christoffer Dall
2015-07-17 8:45 ` Shannon Zhao
2015-07-17 10:21 ` Christoffer Dall
2015-07-21 1:16 ` Shannon Zhao
2015-08-03 19:39 ` Christoffer Dall
2015-07-06 2:17 ` [PATCH 05/18] KVM: ARM64: Add reset and access handlers for PMSELR_EL0 register shannon.zhao at linaro.org
2015-07-06 2:17 ` [PATCH 06/18] KVM: ARM64: Add reset and access handlers for PMCEID0_EL0 and PMCEID1_EL0 register shannon.zhao at linaro.org
2015-07-17 13:51 ` Christoffer Dall
2015-07-06 2:17 ` [PATCH 07/18] KVM: ARM64: PMU: Add perf event map and introduce perf event creating function shannon.zhao at linaro.org
2015-07-17 14:30 ` Christoffer Dall
2015-07-21 1:35 ` Shannon Zhao
2015-08-03 19:55 ` Christoffer Dall
2015-07-06 2:17 ` [PATCH 08/18] KVM: ARM64: Add reset and access handlers for PMXEVTYPER_EL0 register shannon.zhao at linaro.org
2015-07-06 2:17 ` [PATCH 09/18] KVM: ARM64: Add reset and access handlers for PMXEVCNTR_EL0 register shannon.zhao at linaro.org
2015-07-17 14:41 ` Christoffer Dall
2015-07-06 2:17 ` [PATCH 10/18] KVM: ARM64: Add reset and access handlers for PMCCNTR_EL0 register shannon.zhao at linaro.org
2015-07-17 14:42 ` Christoffer Dall
2015-07-06 2:17 ` [PATCH 11/18] KVM: ARM64: Add reset and access handlers for PMCNTENSET_EL0 and PMCNTENCLR_EL0 register shannon.zhao at linaro.org
2015-07-17 14:52 ` Christoffer Dall
2015-07-06 2:17 ` [PATCH 12/18] KVM: ARM64: Add reset and access handlers for PMINTENSET_EL1 and PMINTENCLR_EL1 register shannon.zhao at linaro.org
2015-07-17 14:56 ` Christoffer Dall [this message]
2015-07-06 2:17 ` [PATCH 13/18] KVM: ARM64: Add reset and access handlers for PMOVSSET_EL0 and PMOVSCLR_EL0 register shannon.zhao at linaro.org
2015-07-17 14:59 ` Christoffer Dall
2015-07-17 15:02 ` Christoffer Dall
2015-07-06 2:17 ` [PATCH 14/18] KVM: ARM64: Add reset and access handlers for PMUSERENR_EL0 register shannon.zhao at linaro.org
2015-07-17 15:01 ` Christoffer Dall
2015-07-06 2:17 ` [PATCH 15/18] KVM: ARM64: Add reset and access handlers for PMSWINC_EL0 register shannon.zhao at linaro.org
2015-07-17 15:13 ` Christoffer Dall
2015-07-06 2:17 ` [PATCH 16/18] KVM: ARM64: Add access handlers for PMEVCNTRn_EL0 and PMEVTYPERn_EL0 register shannon.zhao at linaro.org
2015-07-17 15:19 ` Christoffer Dall
2015-07-06 2:17 ` [PATCH 17/18] KVM: ARM64: Add PMU overflow interrupt routing shannon.zhao at linaro.org
2015-07-17 15:28 ` Christoffer Dall
2015-07-06 2:17 ` [PATCH 18/18] KVM: ARM64: Add KVM_CAP_ARM_PMU and KVM_ARM_PMU_SET_IRQ shannon.zhao at linaro.org
2015-07-17 15:32 ` Christoffer Dall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150717145624.GV14024@cbox \
--to=christoffer.dall@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).