From mboxrd@z Thu Jan 1 00:00:00 1970 From: broonie@kernel.org (Mark Brown) Date: Mon, 20 Jul 2015 18:31:53 +0100 Subject: [PATCH 2/2] regulator: MT6311: Add support for MT6311 regulator In-Reply-To: <1437377793-31558-3-git-send-email-henryc.chen@mediatek.com> References: <1437377793-31558-1-git-send-email-henryc.chen@mediatek.com> <1437377793-31558-3-git-send-email-henryc.chen@mediatek.com> Message-ID: <20150720173153.GH11162@sirena.org.uk> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, Jul 20, 2015 at 03:36:33PM +0800, Henry Chen wrote: > @@ -460,6 +460,15 @@ config REGULATOR_MT6397 > This driver supports the control of different power rails of device > through regulator interface. > > +config REGULATOR_MT6311 > + tristate "MediaTek MT6311 PMIC" Please keep these files sorted, MT6311 should be before MT6397. > +static struct mt6311_pdata *mt6311_parse_regulators_dt( > + struct device *dev) > +{ > + struct mt6311_pdata *pdata; > + struct device_node *node; > + int i, num, n; > + > + node = of_get_child_by_name(dev->of_node, "regulators"); > + if (!node) { > + dev_err(dev, "regulators node not found\n"); > + return ERR_PTR(-ENODEV); > + } > + > + num = of_regulator_match(dev, node, mt6311_matches, > + ARRAY_SIZE(mt6311_matches)); Please convert this to use the modern method of specifying the regulator DT bindings by providing of_match and regulators_node in the regulator_desc so the core does the mapping for yand regulators_node in the regulator_desc so the core does the mapping for yand regulators_node in the regulator_desc so the core does the mapping for yand regulators_node in the regulator_desc so the core does the mapping for you and you can delete the DT handling code. Otherwise this driver looks good. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 473 bytes Desc: Digital signature URL: