From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Thu, 23 Jul 2015 16:53:22 +0100 Subject: [PATCH-v2 1/2] mfd: devicetree: bindings: 88pm800: Add DT property for dual phase enable In-Reply-To: <1437495782-15767-2-git-send-email-vaibhav.hiremath@linaro.org> References: <1437495782-15767-1-git-send-email-vaibhav.hiremath@linaro.org> <1437495782-15767-2-git-send-email-vaibhav.hiremath@linaro.org> Message-ID: <20150723155322.GU3436@x1> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, 21 Jul 2015, Vaibhav Hiremath wrote: > 88PM860 family of device supports dual phase mode on BUCK1 supply > providing total 6A capacity. > Note that by default they operate independently with 3A capacity. > > This patch updates the devicetree binding with DT property > to enable dual-phase mode on BUCK1. > > Signed-off-by: Vaibhav Hiremath > --- > Documentation/devicetree/bindings/mfd/88pm800.txt | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mfd/88pm800.txt b/Documentation/devicetree/bindings/mfd/88pm800.txt > index dec842f..2c82fcb 100644 > --- a/Documentation/devicetree/bindings/mfd/88pm800.txt > +++ b/Documentation/devicetree/bindings/mfd/88pm800.txt > @@ -9,6 +9,12 @@ Required parent device properties: > - #interrupt-cells : should be 1. > The cell is the 88pm80x local IRQ number > > +Optional properties : > +- marvell,88pm860-buck1-dualphase-en : If set, enable dual phase on BUCK1, > + providing 6A capacity. > + Without this both BUCK1A and BUCK1B operates independently with 3A capacity. > + (This property is only applicable to 88PM860) You need to get Mark Brown to Ack this. > 88pm80x family of devices consists of varied group of sub-devices: > > Device Supply Names Description -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog