From: lorenzo.pieralisi@arm.com (Lorenzo Pieralisi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/2] ARM: pci: kill pcibios_msi_controller
Date: Sun, 26 Jul 2015 20:00:03 +0100 [thread overview]
Message-ID: <20150726190003.GA9733@red-moon> (raw)
In-Reply-To: <20150726184345.GA27049@jayachandranc.netlogicmicro.com>
On Sun, Jul 26, 2015 at 07:43:46PM +0100, Jayachandran C. wrote:
> On Sun, Jul 26, 2015 at 07:16:46PM +0100, Lorenzo Pieralisi wrote:
> > On Sun, Jul 26, 2015 at 04:25:29PM +0100, Jayachandran C. wrote:
> > > On Fri, Jul 24, 2015 at 05:13:03PM +0100, Lorenzo Pieralisi wrote:
> > > > On ARM PCI systems relying on the pcibios API to initialize PCI host
> > > > controllers, the pcibios_msi_controller weak callback is used to look-up
> > > > the msi_controller pointer, through pci_sys_data msi_ctrl pointer.
> > > >
> > > > pci_sys_data is an ARM specific structure, which prevents using the
> > > > same mechanism (so same PCI host controller drivers) on ARM64 systems.
> > > >
> > > > Since the struct pci_bus already contains an msi_controller pointer and
> > > > the kernel already uses it to look-up the msi controller,
> > > > this patch converts ARM host controller and related pcibios/host bridges
> > > > initialization routines so that the msi_controller pointer look-up can be
> > > > carried out by PCI core code through the struct pci_bus msi pointer,
> > > > removing the need for the arch specific pcibios_msi_controller callback
> > > > and the related pci_sys_data msi_ctrl pointer.
> > > >
> > > > ARM is the only arch relying on the pcibios_msi_controller() weak
> > > > function, hence this patch removes the default weak implementation
> > > > from PCI core code since it becomes of no use.
> > > >
> > > > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> > > > Acked-by: Marc Zyngier <marc.zyngier@arm.com>
> > > > Cc: Pratyush Anand <pratyush.anand@gmail.com>
> > > > Cc: Arnd Bergmann <arnd@arndb.de>
> > > > Cc: Jingoo Han <jingoohan1@gmail.com>
> > > > Cc: Bjorn Helgaas <bhelgaas@google.com>
> > > > Cc: Simon Horman <horms@verge.net.au>
> > > > Cc: Russell King <linux@arm.linux.org.uk>
> > > > Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> > > > Cc: Thierry Reding <thierry.reding@gmail.com>
> > > > Cc: Michal Simek <michal.simek@xilinx.com>
> > > > Cc: Marc Zyngier <marc.zyngier@arm.com>
> > > > ---
> > > > v1->v2
> > > >
> > > > - Added patch to replace panic statements with WARN
> > > > - Removed unused pcibios_msi_controller() and pci_msi_controller() from
> > > > core code
> > > > - Dropped RFT status
> > > >
> > > > v1: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-July/356028.html
> > > >
> > > > arch/arm/include/asm/mach/pci.h | 3 ---
> > > > arch/arm/kernel/bios32.c | 29 +++++++++++++----------------
> > > > drivers/pci/host/pcie-designware.c | 9 +++++++--
> > > > drivers/pci/host/pcie-xilinx.c | 12 ++++++++++--
> > > > drivers/pci/msi.c | 17 +----------------
> > > > 5 files changed, 31 insertions(+), 39 deletions(-)
> > > >
> > > [...]
> > > > diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> > > > index f66be86..0d20142 100644
> > > > --- a/drivers/pci/msi.c
> > > > +++ b/drivers/pci/msi.c
> > > > @@ -77,24 +77,9 @@ static void pci_msi_teardown_msi_irqs(struct pci_dev *dev)
> > > >
> > > > /* Arch hooks */
> > > >
> > > > -struct msi_controller * __weak pcibios_msi_controller(struct pci_dev *dev)
> > > > -{
> > > > - return NULL;
> > > > -}
> > > > -
> > > > -static struct msi_controller *pci_msi_controller(struct pci_dev *dev)
> > > > -{
> > > > - struct msi_controller *msi_ctrl = dev->bus->msi;
> > > > -
> > > > - if (msi_ctrl)
> > > > - return msi_ctrl;
> > > > -
> > > > - return pcibios_msi_controller(dev);
> > > > -}
> > > > -
> > > > int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
> > > > {
> > > > - struct msi_controller *chip = pci_msi_controller(dev);
> > > > + struct msi_controller *chip = dev->bus->msi;
> > > > int err;
> > > >
> > > > if (!chip || !chip->setup_irq)
> > >
> > > Don't you have to go to the top level bus and get the ->msi pointer? Something
> > > like:
> > >
> > > for (bus = dev->bus; bus != NULL; bus = bus->parent)
> > > if (bus->msi)
> > > return bus->msi;
> > >
> > > I have not been following this closely, so I may have missed some patches.
> >
> > The msi pointer is initialized from parent to child in
> > pci_alloc_child_bus(), so PCI core does that for us,
> > that's my understanding.
> >
> > It works the same as sysdata pointer, which is why
> > pcibios_msi_controller works in the current kernel.
>
> Thanks.
>
> > On a side note, are you able to prepare a new version
> > of your set to enable the PCI generic host on ARM64
> > (and remove pci_sys_data and related ifdef CONFIG_ARM
> > from it) ?
> >
> > We are not far from removing the pci_sys_data dependency,
> > if you can't prepare a new version of your series let me
> > know I can do it on your behalf.
>
> I will post an updated patch with a minor fix. I will also
> add a patch for parsing msi-parent and setting ->msi on
> the root bus.
There is no need for any msi parsing in the PCI generic host,
Marc implemented mechanism for us in core code:
https://lkml.org/lkml/2015/7/7/724
Thanks,
Lorenzo
next prev parent reply other threads:[~2015-07-26 19:00 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-24 16:13 [PATCH v2 1/2] ARM: PCI: bios32: replace panic with WARN messages on failures Lorenzo Pieralisi
2015-07-24 16:13 ` [PATCH v2 2/2] ARM: pci: kill pcibios_msi_controller Lorenzo Pieralisi
2015-07-26 15:25 ` Jayachandran C.
2015-07-26 18:16 ` Lorenzo Pieralisi
2015-07-26 18:43 ` Jayachandran C.
2015-07-26 19:00 ` Lorenzo Pieralisi [this message]
2015-07-27 7:26 ` Marc Zyngier
2015-07-26 18:58 ` Russell King - ARM Linux
2015-07-27 9:40 ` Lorenzo Pieralisi
2015-07-27 10:54 ` Russell King - ARM Linux
2015-07-27 11:09 ` Lorenzo Pieralisi
2015-07-24 16:54 ` [PATCH v2 1/2] ARM: PCI: bios32: replace panic with WARN messages on failures Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150726190003.GA9733@red-moon \
--to=lorenzo.pieralisi@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).