From mboxrd@z Thu Jan  1 00:00:00 1970
From: jchandra@broadcom.com (Jayachandran C.)
Date: Fri, 31 Jul 2015 21:37:01 +0530
Subject: [PATCH v3 1/2] PCI: generic: remove dependency on hw_pci
In-Reply-To: <20150730133521.GA12999@red-moon>
References: <1438183681-30519-1-git-send-email-jchandra@broadcom.com>
 <20150730133521.GA12999@red-moon>
Message-ID: <20150731160654.GB31408@jayachandranc.netlogicmicro.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Thu, Jul 30, 2015 at 02:35:21PM +0100, Lorenzo Pieralisi wrote:
> On Wed, Jul 29, 2015 at 04:28:00PM +0100, Jayachandran C wrote:
> > The current code in pci-host-generic.c uses pci_common_init_dev()
> > from ARM platform to do some of the PCI initializations, and this
> > prevents it from being used in ARM64.
> > 
> > The initialization done by pci_common_init_dev() that is needed
> > by pci-host-generic.c is really limited, and can be done easily
> > in the same file without using hw_pci API. The ARM platform
> > requires a pci_sys_data as sysdata for the PCI bus, this can be
> > handled by setting up gen_pci to have a pci_sys_data variable as
> > the first element.
> 
> For the sake of enabling it on ARM64, I am okay with getting
> this merged, keeping in mind that as I already said pci_sys_data
> has to go, it is a hack and I do not want it to spread to
> ALL PCI host drivers that have to work on both ARM/ARM64.
> 
> Comments and tags below.
> 
> > Signed-off-by: Jayachandran C <jchandra@broadcom.com>
> > ---
> > Here's v3 of the patchset.
> > 
> > v2-v3
> >  - rebase to 4.2-rc
> >  - fix PCI_PROBE_ONLY check before calling pcie configure
> >  - added a comment above sysdata
> >  - updated the commit message
> > 
> > v1->v2
> >  - Address comments from Arnd Bergmann and Lorenzo Pieralisi
> >     - move contents of gen_pci_init to gen_pci_probe
> >     - assign resources only when !probe_only
> >  - tested on ARM32 with qemu option -M virt
> > 
> > Notes:
> >  - passing a zeroed out pci_sys_data for ARM looks ok, but I haven't
> >    tested it on ARM.
> >  - tested it on ARM64 fast model
> >  - Any information on how this can be tested on arm is welcome.
> >  - There is only one ifdef, and that can be removed when arm64 gets
> >    a sysdata, or when arm loses its sysdata.
> > 
> >  drivers/pci/host/pci-host-generic.c | 55 ++++++++++++++++++++++++-------------
> >  1 file changed, 36 insertions(+), 19 deletions(-)
> > 
> > diff --git a/drivers/pci/host/pci-host-generic.c b/drivers/pci/host/pci-host-generic.c
> > index ba46e58..e9d9c80 100644
> > --- a/drivers/pci/host/pci-host-generic.c
> > +++ b/drivers/pci/host/pci-host-generic.c
> > @@ -38,7 +38,15 @@ struct gen_pci_cfg_windows {
> >  	const struct gen_pci_cfg_bus_ops	*ops;
> >  };
> >  
> > +/*
> > + * ARM needs platform specific pci_sys_data as the sysdata for PCI.
> > + * We add the sys as the first field below to handle this. sys will
> > + * set to 0, so that the pci functions in do the right thing.
> > + */
> >  struct gen_pci {
> > +#ifdef CONFIG_ARM
> > +	struct pci_sys_data			sys;
> > +#endif
> >  	struct pci_host_bridge			host;
> >  	struct gen_pci_cfg_windows		cfg;
> >  	struct list_head			resources;
> > @@ -48,8 +56,7 @@ static void __iomem *gen_pci_map_cfg_bus_cam(struct pci_bus *bus,
> >  					     unsigned int devfn,
> >  					     int where)
> >  {
> > -	struct pci_sys_data *sys = bus->sysdata;
> > -	struct gen_pci *pci = sys->private_data;
> > +	struct gen_pci *pci = bus->sysdata;
> >  	resource_size_t idx = bus->number - pci->cfg.bus_range->start;
> >  
> >  	return pci->cfg.win[idx] + ((devfn << 8) | where);
> > @@ -64,8 +71,7 @@ static void __iomem *gen_pci_map_cfg_bus_ecam(struct pci_bus *bus,
> >  					      unsigned int devfn,
> >  					      int where)
> >  {
> > -	struct pci_sys_data *sys = bus->sysdata;
> > -	struct gen_pci *pci = sys->private_data;
> > +	struct gen_pci *pci = bus->sysdata;
> >  	resource_size_t idx = bus->number - pci->cfg.bus_range->start;
> >  
> >  	return pci->cfg.win[idx] + ((devfn << 12) | where);
> > @@ -198,13 +204,6 @@ static int gen_pci_parse_map_cfg_windows(struct gen_pci *pci)
> >  	return 0;
> >  }
> >  
> > -static int gen_pci_setup(int nr, struct pci_sys_data *sys)
> > -{
> > -	struct gen_pci *pci = sys->private_data;
> > -	list_splice_init(&pci->resources, &sys->resources);
> > -	return 1;
> > -}
> > -
> >  static int gen_pci_probe(struct platform_device *pdev)
> >  {
> >  	int err;
> > @@ -214,13 +213,7 @@ static int gen_pci_probe(struct platform_device *pdev)
> >  	struct device *dev = &pdev->dev;
> >  	struct device_node *np = dev->of_node;
> >  	struct gen_pci *pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
> > -	struct hw_pci hw = {
> > -		.nr_controllers	= 1,
> > -		.private_data	= (void **)&pci,
> > -		.setup		= gen_pci_setup,
> > -		.map_irq	= of_irq_parse_and_map_pci,
> > -		.ops		= &gen_pci_ops,
> > -	};
> > +	struct pci_bus *bus;
> >  
> >  	if (!pci)
> >  		return -ENOMEM;
> > @@ -258,7 +251,31 @@ static int gen_pci_probe(struct platform_device *pdev)
> >  		return err;
> >  	}
> >  
> > -	pci_common_init_dev(dev, &hw);
> > +	/* do not reassign resource if probe only */
> > +	if (!pci_has_flag(PCI_PROBE_ONLY))
> > +		pci_add_flags(PCI_REASSIGN_ALL_RSRC);
> 
> You should add PCI_REASSIGN_ALL_BUS here. As I said in patch 2 comment,

The idea is to do exactly what pci_common_init_dev does on ARM. There is
not need to change behavior on ARM and deal with the fallout in this
patchset.

> please enable setup-irq.c in an explicit commit, re-sequence the
> series and fold the Kconfig ARM64 enablement in this patch.

I would think that the Makefile and Kconfig changes should be
togethter as the arm64 enablement patch. The previous patch is
to update the gen_pci driver, and it really makes sense in that
order.  I am not sure why you suggest this change.

JC.