From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] Allwinner DT changes for 4.3
Date: Mon, 3 Aug 2015 11:41:43 +0200 [thread overview]
Message-ID: <20150803094143.GA16612@lukather> (raw)
Hi Arnd, Kevin, Olof,
Here is the DT changes for the 4.3 merge window.
I'll be in holidays for the three next weeks, so this is probably
going to be my last "feature" pull request for the 4.3 merge window.
Thanks!
Maxime
The following changes since commit d770e558e21961ad6cfdf0ff7df0eb5d7d4f0754:
Linux 4.2-rc1 (2015-07-05 11:01:52 -0700)
are available in the git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git tags/sunxi-dt-for-4.3
for you to fetch changes up to 60018d027d792bdfe9d98c83a470fa2cdd6a0e1a:
ARM: dts: sun7i: Change cubietruck wifi enable pin to use mmc-pwrseq (2015-08-01 11:25:11 +0200)
----------------------------------------------------------------
Allwinner Device Tree changes for 4.3
A bunch of device tree patches that:
- Enable the OTG controller on some boards
- Various additions to the existing boards
- New boards: A33 Ippo Q8H, Iteaduino Plus,
----------------------------------------------------------------
Chen-Yu Tsai (4):
ARM: dts: sun8i: Add support for USB controllers on A23/A33
ARM: dts: sun8i: sina33: Enable USB hosts
ARM: dts: sun5i: hsg-h702: Enable side volume buttons with LRADC
ARM: dts: sun5i: hsg-h702: Enable USB OTG controller
Hans de Goede (22):
ARM: dts: sun4i: Add USB Dual Role Controller
ARM: dts: sun5i: Add USB Dual Role Controller
ARM: dts: sun6i: Add USB Dual Role Controller
ARM: dts: sun8i: Add A23 usb-phy and otg nodes
ARM: dts: sun8i: Add A33 usb-phy and otg nodes
ARM: dts: sun4i: Enable USB DRC on Chuwi V7 CW0825
ARM: dts: sun4i: Enable USB DRC on the Cubieboard
ARM: dts: sun5i: Enable USB DRC on UTOO P66
ARM: dts: sun6i: Enable USB DRC on the Mele A1000G quad
ARM: dts: sun7i: Enable USB DRC on A20-OLinuxIno-Lime
ARM: dts: sun7i: Enable USB DRC on A20-OLinuxIno-Micro
ARM: dts: sun8i: Enable USB DRC on Ippo Q8H-A23 tablets
ARM: dts: sun8i: Enable USB DRC on GA10H-A33 tablets
ARM: dts: sun8i: Enable USB host on GA10H-A33 tablets
ARM: sun8i: dts: Add Ippo-q8h v1.2 with A33
ARM: dts: sunxi: Add regulator-boot-on to usb host port regulator nodes
ARM: dts: sun4i: Enable otg controller on the ba10-tvbox
ARM: dts: sun4i: Enable otg controller on the mini-x
ARM: dts: sun6i: Enable otg controller on the cs908
ARM: dts: sun5i: Enable USB DRC on A10s OLinuxIno Micro
ARM: dts: sun8i: Enable USB DRC on Ippo Q8H-A33 tablet
ARM: dts: sun7i: Change cubietruck wifi enable pin to use mmc-pwrseq
Josef Gajdusek (1):
ARM: dts: sun4i: Add Iteaduino Plus A10
Karsten Merker (1):
devicetree: Add msi to the vendor-prefix list
Mark Janssen (1):
ARM: dts: sun5i: Enable USB DRC on A13 OLinuxIno
Maxime Ripard (1):
ARM: sunxi: dt: Convert users to the PIO interrupts binding
Michal Suchanek (2):
ARM: dts: axp152: Add a dtsi file for the axp152 pmic
ARM: dts: A10s-OLinuxIno: Add a node for axp152 pmic
Remy van Elst (1):
ARM: dts: sun4i: Enable USB DRC on A10 OLinuxIno Lime
Roman Byshko (2):
ARM: dts: sun7i: Add USB Dual Role Controller
ARM: dts: sun7i: Enable USB DRC on Cubietruck
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/axp152.dtsi | 49 +++++
arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts | 15 ++
arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts | 34 ++++
arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 19 ++
.../boot/dts/sun4i-a10-itead-iteaduino-plus.dts | 202 +++++++++++++++++++++
arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 15 ++
arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 32 ++++
arch/arm/boot/dts/sun4i-a10.dtsi | 16 +-
arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 37 +++-
arch/arm/boot/dts/sun5i-a13-hsg-h702.dts | 58 ++++++
arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 37 ++++
arch/arm/boot/dts/sun5i-a13-utoo-p66.dts | 29 ++-
arch/arm/boot/dts/sun5i.dtsi | 16 +-
arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts | 5 +
arch/arm/boot/dts/sun6i-a31.dtsi | 16 +-
arch/arm/boot/dts/sun6i-a31s-cs908.dts | 5 +
arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 56 ++++--
arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts | 32 ++++
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 32 ++++
arch/arm/boot/dts/sun7i-a20.dtsi | 16 +-
arch/arm/boot/dts/sun8i-a23-a33.dtsi | 25 ++-
arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts | 9 +
arch/arm/boot/dts/sun8i-a23.dtsi | 33 ++++
arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts | 17 ++
arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts | 133 ++++++++++++++
arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts | 13 ++
arch/arm/boot/dts/sun8i-a33.dtsi | 33 ++++
arch/arm/boot/dts/sunxi-common-regulators.dtsi | 2 +
31 files changed, 962 insertions(+), 29 deletions(-)
create mode 100644 arch/arm/boot/dts/axp152.dtsi
create mode 100644 arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
create mode 100644 arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150803/50eb4ded/attachment-0001.sig>
next reply other threads:[~2015-08-03 9:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-03 9:41 Maxime Ripard [this message]
2015-08-06 8:12 ` [GIT PULL] Allwinner DT changes for 4.3 Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150803094143.GA16612@lukather \
--to=maxime.ripard@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox