linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: viresh.kumar@linaro.org (Viresh Kumar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 1/6] cpufreq: make scaling_boost_freqs sysfs attr available when boost is enabled
Date: Fri, 7 Aug 2015 17:07:39 +0530	[thread overview]
Message-ID: <20150807113739.GF6939@linux> (raw)
In-Reply-To: <1594902.Dv5JKhve0y@amdc1976>

On 07-08-15, 13:12, Bartlomiej Zolnierkiewicz wrote:
> >From 993ebb6fc632ec7b61654c9610c90ff4dca4be34 Mon Sep 17 00:00:00 2001
> From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> Date: Fri, 7 Aug 2015 13:07:51 +0200
> Subject: [PATCH] cpufreq-dt: make scaling_boost_freqs sysfs attr available
>  when boost is enabled
> 
> Make scaling_boost_freqs sysfs attribute is available when
> cpufreq-dt driver is used and boost support is enabled.
> 
> Cc: Thomas Abraham <thomas.ab@samsung.com>
> Cc: Javier Martinez Canillas <javier@osg.samsung.com>
> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> ---
>  drivers/cpufreq/cpufreq-dt.c | 11 ++++++++++-
>  include/linux/cpufreq.h      |  1 +
>  2 files changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
> index b9259ab..c6a3b98 100644
> --- a/drivers/cpufreq/cpufreq-dt.c
> +++ b/drivers/cpufreq/cpufreq-dt.c
> @@ -36,6 +36,12 @@ struct private_data {
>  	unsigned int voltage_tolerance; /* in percentage */
>  };
>  
> +static struct freq_attr *cpufreq_dt_attr[] = {
> +	&cpufreq_freq_attr_scaling_available_freqs,
> +	NULL,   /* Extra space for boost-attr if required */
> +	NULL,
> +};
> +
>  static int set_target(struct cpufreq_policy *policy, unsigned int index)
>  {
>  	struct dev_pm_opp *opp;
> @@ -182,6 +188,8 @@ try_again:
>  	return ret;
>  }
>  
> +static struct cpufreq_driver dt_cpufreq_driver;
> +
>  static int cpufreq_init(struct cpufreq_policy *policy)
>  {
>  	struct cpufreq_frequency_table *freq_table;
> @@ -336,6 +344,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
>  		ret = cpufreq_enable_boost_support();
>  		if (ret)
>  			goto out_free_cpufreq_table;
> +		cpufreq_dt_attr[1] = &cpufreq_freq_attr_scaling_boost_freqs;
>  	}
>  
>  	policy->cpuinfo.transition_latency = transition_latency;
> @@ -411,7 +420,7 @@ static struct cpufreq_driver dt_cpufreq_driver = {
>  	.exit = cpufreq_exit,
>  	.ready = cpufreq_ready,
>  	.name = "cpufreq-dt",
> -	.attr = cpufreq_generic_attr,
> +	.attr = cpufreq_dt_attr,
>  };
>  
>  static int dt_cpufreq_probe(struct platform_device *pdev)
> diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
> index 95f0186..657542d 100644
> --- a/include/linux/cpufreq.h
> +++ b/include/linux/cpufreq.h
> @@ -609,6 +609,7 @@ struct cpufreq_frequency_table *cpufreq_frequency_get_table(unsigned int cpu);
>  
>  /* the following are really really optional */
>  extern struct freq_attr cpufreq_freq_attr_scaling_available_freqs;
> +extern struct freq_attr cpufreq_freq_attr_scaling_boost_freqs;
>  extern struct freq_attr *cpufreq_generic_attr[];
>  int cpufreq_table_validate_and_show(struct cpufreq_policy *policy,
>  				      struct cpufreq_frequency_table *table);

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

-- 
viresh

  reply	other threads:[~2015-08-07 11:37 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-06 13:41 [PATCH v4 0/6] cpufreq: use generic cpufreq drivers for Exynos4x12 platform Bartlomiej Zolnierkiewicz
2015-08-06 13:41 ` [PATCH v4 1/6] cpufreq: make scaling_boost_freqs sysfs attr available when boost is enabled Bartlomiej Zolnierkiewicz
2015-08-07  3:41   ` Viresh Kumar
2015-08-07 10:34     ` Bartlomiej Zolnierkiewicz
2015-08-07 10:41       ` Viresh Kumar
2015-08-07 11:12         ` Bartlomiej Zolnierkiewicz
2015-08-07 11:37           ` Viresh Kumar [this message]
2015-08-07 22:21             ` Rafael J. Wysocki
2015-08-08  2:06               ` Viresh Kumar
2015-08-06 13:41 ` [PATCH v4 2/6] clk: samsung: exynos4x12: add cpu clock configuration data and instantiate cpu clock Bartlomiej Zolnierkiewicz
2015-08-25 18:40   ` Michael Turquette
2015-08-06 13:41 ` [PATCH v4 3/6] ARM: dts: Exynos4x12: add CPU OPP and regulator supply property Bartlomiej Zolnierkiewicz
2015-08-06 13:41 ` [PATCH v4 4/6] ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12 Bartlomiej Zolnierkiewicz
2015-08-06 13:41 ` [PATCH v4 5/6] cpufreq: exynos: remove Exynos4x12 specific cpufreq driver support Bartlomiej Zolnierkiewicz
2015-08-06 13:41 ` [PATCH v4 6/6] cpufreq: remove no longer needed CPU_FREQ_BOOST_SW config option Bartlomiej Zolnierkiewicz
2015-08-07  4:31   ` Viresh Kumar
2015-08-06 23:53 ` [PATCH v4 0/6] cpufreq: use generic cpufreq drivers for Exynos4x12 platform Kukjin Kim
2015-08-07  3:50   ` Viresh Kumar
2015-08-07  3:51     ` Viresh Kumar
2015-08-07  4:13       ` Krzysztof Kozlowski
2015-08-07  4:30         ` Viresh Kumar
2015-08-07  4:52           ` Krzysztof Kozlowski
2015-08-07  5:18             ` Viresh Kumar
2015-08-07 11:31               ` Bartlomiej Zolnierkiewicz
2015-08-07 11:39                 ` Viresh Kumar
2015-08-07 11:47                   ` Bartlomiej Zolnierkiewicz
2015-08-07 11:56                     ` Viresh Kumar
2015-08-07 22:24                       ` Rafael J. Wysocki
2015-08-08  2:07                         ` Viresh Kumar
2015-08-08  7:27                           ` Krzysztof Kozlowski
2015-08-08 13:59                             ` Viresh Kumar
2015-08-10  1:27                             ` Kukjin Kim
2015-08-11  2:20                               ` Krzysztof Kozlowski
2015-08-11  7:51                                 ` Kukjin Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150807113739.GF6939@linux \
    --to=viresh.kumar@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).