From mboxrd@z Thu Jan 1 00:00:00 1970 From: linux@arm.linux.org.uk (Russell King - ARM Linux) Date: Sat, 8 Aug 2015 16:35:41 +0100 Subject: [PATCH v5 4/6] drm: bridge/dw_hdmi-i2s-audio: add audio driver In-Reply-To: <1434731295-11060-1-git-send-email-ykk@rock-chips.com> References: <1434730417-10629-1-git-send-email-ykk@rock-chips.com> <1434731295-11060-1-git-send-email-ykk@rock-chips.com> Message-ID: <20150808153540.GL7557@n2100.arm.linux.org.uk> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sat, Jun 20, 2015 at 12:28:15AM +0800, Yakir Yang wrote: > Add ALSA based HDMI I2S audio driver for dw_hdmi. Sound card > driver could connect to this codec through the codec dai name > "dw-hdmi-i2s-audio". I'm applying this patch to my tree with some changes. I haven't seen anyone ack it, nor review it any further. I'm hoping someone can ack this patch with the following changes below - I'll be posting it as part of my dw-hdmi devel updates later today. > + ret = request_irq(dw->data.irq, snd_dw_hdmi_irq, IRQF_SHARED, > + "dw-dw-audio", dw); DRIVER_NAME, dw); > +MODULE_AUTHOR("Yakir Yang "); > +MODULE_DESCRIPTION("DW dw Audio ASoC Interface"); Fixing this to be "Synopsis DesignWare HDMI I2S ASoC interface". > +MODULE_LICENSE("GPL v2"); > +MODULE_ALIAS(PLATFORM_MODULE_PREFIX DRIVER_NAME); Replacing PLATFORM_MODULE_PREFIX with the "platform:" string. > + if (hdmi_readb(hdmi, HDMI_CONFIG1_ID) & HDMI_CONFIG1_AHB) { > pdevinfo.name = "dw-hdmi-ahb-audio"; Fixing this to be "dw-hdmi-i2s-audio". -- FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up according to speedtest.net.