From mboxrd@z Thu Jan 1 00:00:00 1970 From: linux@arm.linux.org.uk (Russell King - ARM Linux) Date: Wed, 12 Aug 2015 09:03:54 +0100 Subject: [PATCH v2 1/2] soc/fsl: add freescale dir for SOC specific drivers In-Reply-To: References: <1439358807-9024-1-git-send-email-dongsheng.wang@freescale.com> <20150812074439.GF7557@n2100.arm.linux.org.uk> Message-ID: <20150812080354.GH7557@n2100.arm.linux.org.uk> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Aug 12, 2015 at 08:01:32AM +0000, Wang Dongsheng wrote: > Hi Russell, > > Thanks for your review. :) > > > -----Original Message----- > > From: Russell King - ARM Linux [mailto:linux at arm.linux.org.uk] > > Sent: Wednesday, August 12, 2015 3:45 PM > > To: Wang Dongsheng-B40534 > > Cc: shawn.guo at linaro.org; Wang Huan-B18965; linus.walleij at linaro.org; linux- > > kernel at vger.kernel.org; sandeep_n at ti.com; hdegoede at redhat.com; linux-arm- > > kernel at lists.infradead.org > > Subject: Re: [PATCH v2 1/2] soc/fsl: add freescale dir for SOC specific drivers > > > > On Wed, Aug 12, 2015 at 01:53:26PM +0800, Dongsheng Wang wrote: > > > diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig new > > > file mode 100644 index 0000000..863d1ef > > > --- /dev/null > > > +++ b/drivers/soc/fsl/Kconfig > > > @@ -0,0 +1,18 @@ > > > +# > > > +# Freescale SOC drivers > > > +# > > > +menuconfig FSL_SOC_DRIVERS > > > + bool "Freescale Soc Drivers" > > > + default n > > > > No need for default n. > > Thanks. Fix it in next version. > > > > + help > > > + Say y here to enable Freescale LS1021A Soc Device Drivers support. > > > + The Soc Drivers provides the device driver that is a specific block > > > + or feature on LS1021A platform. > > > > Help text should be indented by two spaces as per almost every other help text. > > > > Thanks. My mistake... > > > > + > > > +if LS1_SOC_DRIVERS > > > + source "drivers/soc/fsl/ls1/Kconfig" > > > +endif > > > diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile new > > > file mode 100644 index 0000000..b4215dd > > > --- /dev/null > > > +++ b/drivers/soc/fsl/Makefile > > > @@ -0,0 +1,6 @@ > > > +# > > > +# Makefile for Freescale Soc specific device drivers. > > > +# > > > + > > > +obj-$(CONFIG_LS1_SOC_DRIVERS) += ls1/ > > > + > > > diff --git a/drivers/soc/fsl/ls1/Kconfig b/drivers/soc/fsl/ls1/Kconfig > > > new file mode 100644 index 0000000..7556f44 > > > --- /dev/null > > > +++ b/drivers/soc/fsl/ls1/Kconfig > > > @@ -0,0 +1,3 @@ > > > +# > > > +# LS-1 Soc drivers > > > +# > > > > Doesn't this directory need a Makefile as well? > > > > 2/2 patch add a config option and Makefile for this. If _just_ this patch is merged, it creates a build problem as CONFIG_LS1_SOC_DRIVERS can be enabled, which will cause the kbuild to decend into drivers/soc/fsl/ls1, where it will stop due to the missing build error. Please fix this by adding at least an empty Makefile to this directory. Do not rely on patch 2 being merged to "fix" this. -- FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up according to speedtest.net.