From mboxrd@z Thu Jan  1 00:00:00 1970
From: lee.jones@linaro.org (Lee Jones)
Date: Wed, 26 Aug 2015 17:40:12 +0100
Subject: [PATCH 1/4] remoteproc: dt: Provide bindings for ST's Remote
 Processor Controller driver
In-Reply-To: <55DDE25A.2050000@mentor.com>
References: <1440594483-29601-1-git-send-email-lee.jones@linaro.org>
 <1440594483-29601-2-git-send-email-lee.jones@linaro.org>
 <55DDE25A.2050000@mentor.com>
Message-ID: <20150826164012.GA19409@x1>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Wed, 26 Aug 2015, Nathan Lynch wrote:

> On 08/26/2015 08:08 AM, Lee Jones wrote:
> > diff --git a/Documentation/devicetree/bindings/remoteproc/st-rproc.txt b/Documentation/devicetree/bindings/remoteproc/st-rproc.txt
> > new file mode 100644
> > index 0000000..6a933c1
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/remoteproc/st-rproc.txt
> > @@ -0,0 +1,38 @@
> > +STMicroelectronics Remote Processor
> > +-----------------------------------
> > +
> > +This binding provides support for adjunct processors found on ST SoCs.
> > +
> > +The remote processors can be controlled from the bootloader or the primary OS.
> > +If the bootloader starts a remote processor processor the primary OS must detect
> > +its state and act accordingly.
> > +
> > +The node name is significant, as it defines the name of the CPU and the name
> > +of the firmware to load: "rproc-<name>-fw".
> 
> This business about the firmware name describes a behavior of Linux's
> core remoteproc code and seems out of place in a binding document.

Agreed, will remove.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog