From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/6] ARM: dts: sunxi: Add dtsi for AXP221 PMIC
Date: Fri, 28 Aug 2015 14:31:59 +0200 [thread overview]
Message-ID: <20150828123159.GJ29389@lukather> (raw)
In-Reply-To: <1440755679-8266-3-git-send-email-wens@csie.org>
On Fri, Aug 28, 2015 at 05:54:35PM +0800, Chen-Yu Tsai wrote:
> The AXP221 PMIC is used with some Allwinner SoCs. This patch adds
> a dtsi file listing all the regulator nodes. The regulators are
> initialized based on their device node names.
>
> This can later be used with the AXP223 PMIC as well, which has
> the same functionality as AXP221, except for its host interface.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
> arch/arm/boot/dts/axp221.dtsi | 148 ++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 148 insertions(+)
> create mode 100644 arch/arm/boot/dts/axp221.dtsi
>
> diff --git a/arch/arm/boot/dts/axp221.dtsi b/arch/arm/boot/dts/axp221.dtsi
> new file mode 100644
> index 000000000000..74836f329863
> --- /dev/null
> +++ b/arch/arm/boot/dts/axp221.dtsi
> @@ -0,0 +1,148 @@
> +/*
> + * Copyright 2015 Chen-Yu Tsai
> + *
> + * Chen-Yu Tsai <wens@csie.org>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/*
> + * AXP221/221s/223 Integrated Power Management Chip
> + * http://www.x-powers.com/product/AXP22X.php
> + * http://dl.linux-sunxi.org/AXP/AXP221%20Datasheet%20V1.2%2020130326%20.pdf
> + */
I'm usually not really fond of URLs in the source code and/or the
commit logs. They tend to be broken very easily.
> +
> +&axp221 {
> + compatible = "x-powers,axp221";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + regulators {
> + /* Default work frequency for buck regulators */
> + x-powers,dcdc-freq = <3000>;
> +
> + /* supplies for dc1sw & dc5ldo are connected internally */
> + dcdc1-supply = <®_dcdc1>;
> + dcdc5-supply = <®_dcdc5>;
so the parent regulator of DCDC1 is DCDC1 ?
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150828/7cfabc51/attachment-0001.sig>
next prev parent reply other threads:[~2015-08-28 12:31 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-28 9:54 [PATCH 0/6] ARM: sunxi: Support MSI Primo81 tablet and Sinlinx SinA31s Chen-Yu Tsai
2015-08-28 9:54 ` [PATCH 1/6] ARM: dts: sun6i: Add lradc node Chen-Yu Tsai
2015-08-28 12:30 ` Maxime Ripard
2015-08-28 9:54 ` [PATCH 2/6] ARM: dts: sunxi: Add dtsi for AXP221 PMIC Chen-Yu Tsai
2015-08-28 12:31 ` Maxime Ripard [this message]
2015-08-28 16:09 ` Chen-Yu Tsai
2015-08-28 20:43 ` Maxime Ripard
2015-08-29 2:07 ` Chen-Yu Tsai
2015-09-01 6:29 ` Maxime Ripard
2015-09-01 6:40 ` Chen-Yu Tsai
2015-09-03 20:07 ` Maxime Ripard
2015-08-28 9:54 ` [PATCH 3/6] ARM: dts: sun6i: hummingbird: Use axp221.dtsi for axp221 regulators Chen-Yu Tsai
2015-08-28 12:32 ` Maxime Ripard
2015-08-28 16:47 ` Chen-Yu Tsai
2015-08-28 20:44 ` Maxime Ripard
2015-08-28 9:54 ` [PATCH 4/6] ARM: dts: sun6i: Add mmc2 pins for 8 bit emmc Chen-Yu Tsai
2015-08-28 12:33 ` Maxime Ripard
2015-08-28 9:54 ` [PATCH 5/6] ARM: dts: sun6i: Add support for Sinlinx A31s SDK board Chen-Yu Tsai
2015-08-28 12:34 ` Maxime Ripard
2015-09-14 7:24 ` Chen-Yu Tsai
2015-09-16 6:20 ` Maxime Ripard
2015-09-18 9:36 ` Chen-Yu Tsai
2015-08-28 9:54 ` [PATCH 6/6] ARM: dts: sun6i: Add dts file for MSI Primo81 tablet Chen-Yu Tsai
2015-08-28 12:38 ` Maxime Ripard
2015-08-28 13:31 ` Siarhei Siamashka
2015-08-28 21:02 ` Maxime Ripard
2015-08-29 4:43 ` Siarhei Siamashka
2015-09-10 13:09 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150828123159.GJ29389@lukather \
--to=maxime.ripard@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox