From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Fri, 28 Aug 2015 14:34:43 +0200 Subject: [PATCH 5/6] ARM: dts: sun6i: Add support for Sinlinx A31s SDK board In-Reply-To: <1440755679-8266-6-git-send-email-wens@csie.org> References: <1440755679-8266-1-git-send-email-wens@csie.org> <1440755679-8266-6-git-send-email-wens@csie.org> Message-ID: <20150828123443.GM29389@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, Aug 28, 2015 at 05:54:38PM +0800, Chen-Yu Tsai wrote: > The Sinlinx A31s SDK is a A31s based module/baseboard development kit. > > The core module has the SoC, PMIC, DRAM, eMMC and supporting components. > There are also pads for UART0, JTAG and I2S. Can you use that core module without that baseboard? > The baseboard has 100 Mbps Ethernet, 5x USB 2.0 host ports via a USB 2.0 > hub chip, MMC, HDMI, SPDIF, CIR, audio jacks, 2 tablet-like volume > buttons, RS232 style UART and USB OTG (though VBUS is not connected). > Various headers are available for other addon modules, such as SDIO > WiFi, LCD display, camera sensor, UARTs, I2C, SPI and GPIOs. Can the baseboard be used with our core modules? Thanks, Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: