[PATCH] ARM: dts: Add ddc i2c reference to veyron

[briannorris@chromium.org (Brian Norris)]

On Thu, Sep 03, 2015 at 02:00:26PM -0700, Doug Anderson wrote:
> On Wed, Sep 2, 2015 at 2:25 PM, Douglas Anderson <dianders@chromium.org> wrote:
> > The ddc-i2c-bus property was missing from the veyron dtsi file since
> > downstream the ddc-i2c-bus was still being specified in rk3288.dtsi and
> > nobody noticed when the veyron dtsi was sent upstream.  Add it.
> >
> > Signed-off-by: Douglas Anderson <dianders@chromium.org>
> > ---
> > Note: I noticed that this was wrong but I don't currently have
> > graphics up and running on upstream on veyron.  Posting this anyway
> > since it's pretty clear that it's needed.  If someone else wants to
> > try it out that'd be nice, otherwise I'll put it on my list to figure
> > out how to get myself setup for graphics upstream.  ;)
> 
> OK, I've used Heiko's "somewhat stable" branch to test this against
> something very close to mainline.
> 
> Without my patch I can't read the HDMI EDID.  With my patch I can.  :)

Same for veyron-jaq:

Tested-by: Brian Norris <briannorris@chromium.org>