linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: linux@arm.linux.org.uk (Russell King - ARM Linux)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/9] ARM: dts: imx6dql-nitrogen6x: add touchscreen support
Date: Tue, 8 Sep 2015 21:33:57 +0100	[thread overview]
Message-ID: <20150908203357.GD21084@n2100.arm.linux.org.uk> (raw)
In-Reply-To: <1441723760.3241.26.camel@pengutronix.de>

On Tue, Sep 08, 2015 at 04:49:20PM +0200, Philipp Zabel wrote:
> Am Dienstag, den 08.09.2015, 16:34 +0200 schrieb Gary Bisson:
> > This patch adds the different touchscreens that can be connected using
> > the displays available for this board.
> > http://boundarydevices.com/product-category/displays/
> > 
> > Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
> > ---
> >  arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 16 ++++++++++++++++
> >  1 file changed, 16 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
> > index ad16dce..24b667d 100644
> > --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
> > +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
> > @@ -284,6 +284,22 @@
> >  	pinctrl-names = "default";
> >  	pinctrl-0 = <&pinctrl_i2c3>;
> >  	status = "okay";
> > +
> > +	egalax_ts at 04 {
> 
> I'd prefer to use generic names for the nodes, such as "touchscreen at 04",
> and "touchscreen at 38" below.

ePAPR actually says that the node name should be the general class of
the device, and recommending that it should be generic:

2.2.1.1 Node Name Requirements
...
The node-name shall start with a lower or uppercase character and should
describe the general class of device.

2.2.2 Generic Names Recommendation
The name of a node should be somewhat generic, reflecting the function of
the device and not its precise programming model. If appropriate, the name
should be one of the following choices: ...

It would be nice if more bindings followed this.

-- 
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

  reply	other threads:[~2015-09-08 20:33 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-07 16:57 [PATCH 0/4] ARM: dts: update Boundary Devices boards support Gary Bisson
2015-09-07 16:57 ` [PATCH 1/4] ARM: dts: imx6dql-nitrogen6x: add touchscreen support Gary Bisson
2015-09-08  6:58   ` Philipp Zabel
2015-09-08 13:12     ` Gary Bisson
2015-09-07 16:57 ` [PATCH 2/4] ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support Gary Bisson
2015-09-07 16:57 ` [PATCH 3/4] ARM: dts: imx: add Boundary Devices Nitrogen6_Max board Gary Bisson
2015-09-07 16:57 ` [PATCH 4/4] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board Gary Bisson
2015-09-08  1:08   ` Fabio Estevam
2015-09-08 10:18     ` Gary Bisson
2015-09-08 11:41       ` Fabio Estevam
2015-09-08 14:34 ` [PATCH v2 0/9] ARM: dts: update Boundary Devices boards support Gary Bisson
2015-09-08 14:34   ` [PATCH v2 1/9] ARM: dts: imx6dql-nitrogen6x: add touchscreen support Gary Bisson
2015-09-08 14:49     ` Philipp Zabel
2015-09-08 20:33       ` Russell King - ARM Linux [this message]
2015-09-09 10:03       ` Gary Bisson
2015-09-08 14:34   ` [PATCH v2 2/9] ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support Gary Bisson
2015-09-08 14:34   ` [PATCH v2 3/9] ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 Gary Bisson
2015-09-08 14:34   ` [PATCH v2 4/9] ARM: dts: imx6qdl-sabrelite: " Gary Bisson
2015-09-08 14:34   ` [PATCH v2 5/9] of: Add Boundary Devices Inc. vendor prefix Gary Bisson
2015-09-08 14:34   ` [PATCH v2 6/9] ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices Gary Bisson
2015-09-08 14:34   ` [PATCH v2 7/9] ARM: dts: imx6dl-nitrogen6x: " Gary Bisson
2015-09-08 14:34   ` [PATCH v2 8/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Max board Gary Bisson
2015-09-08 14:34   ` [PATCH v2 9/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board Gary Bisson
2015-09-09 12:30 ` [PATCH v3 0/9] ARM: dts: update Boundary Devices boards support Gary Bisson
2015-09-09 12:30   ` [PATCH v3 1/9] ARM: dts: imx6dql-nitrogen6x: add touchscreen support Gary Bisson
2015-09-09 12:30   ` [PATCH v3 2/9] ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support Gary Bisson
2015-09-09 12:30   ` [PATCH v3 3/9] ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 Gary Bisson
2015-09-09 12:30   ` [PATCH v3 4/9] ARM: dts: imx6qdl-sabrelite: " Gary Bisson
2015-09-09 12:30   ` [PATCH v3 5/9] of: Add Boundary Devices Inc. vendor prefix Gary Bisson
2015-09-09 12:30   ` [PATCH v3 6/9] ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices Gary Bisson
2015-09-09 12:30   ` [PATCH v3 7/9] ARM: dts: imx6dl-nitrogen6x: " Gary Bisson
2015-09-09 12:30   ` [PATCH v3 8/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Max board Gary Bisson
2015-09-09 12:30   ` [PATCH v3 9/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board Gary Bisson
2015-09-30  6:03   ` [PATCH v3 0/9] ARM: dts: update Boundary Devices boards support Shawn Guo
2015-09-30 13:46 ` [RESEND][PATCH " Gary Bisson
2015-09-30 13:46   ` [RESEND][PATCH v3 1/9] ARM: dts: imx6dql-nitrogen6x: add touchscreen support Gary Bisson
2015-09-30 13:46   ` [RESEND][PATCH v3 2/9] ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support Gary Bisson
2015-09-30 13:46   ` [RESEND][PATCH v3 3/9] ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 Gary Bisson
2015-09-30 13:46   ` [RESEND][PATCH v3 4/9] ARM: dts: imx6qdl-sabrelite: " Gary Bisson
2015-09-30 13:46   ` [RESEND][PATCH v3 5/9] of: Add Boundary Devices Inc. vendor prefix Gary Bisson
2015-10-01 13:26     ` Rob Herring
2015-09-30 13:46   ` [RESEND][PATCH v3 6/9] ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices Gary Bisson
2015-09-30 13:46   ` [RESEND][PATCH v3 7/9] ARM: dts: imx6dl-nitrogen6x: " Gary Bisson
2015-09-30 13:46   ` [RESEND][PATCH v3 8/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Max board Gary Bisson
2015-09-30 13:46   ` [RESEND][PATCH v3 9/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board Gary Bisson
2015-10-08  8:02   ` [RESEND][PATCH v3 0/9] ARM: dts: update Boundary Devices boards support Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150908203357.GD21084@n2100.arm.linux.org.uk \
    --to=linux@arm.linux.org.uk \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).