From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Wed, 9 Sep 2015 16:05:59 +0200 Subject: [PATCH 0/5] Add eeprom to the Olimex series of boards In-Reply-To: <1441790715-11957-1-git-send-email-o.schinagl@ultimaker.com> References: <1441790715-11957-1-git-send-email-o.schinagl@ultimaker.com> Message-ID: <20150909140559.GD9885@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Sep 09, 2015 at 11:25:10AM +0200, Olliver Schinagl wrote: > Some of the olimex series of boards feature a permanently connected eeprom on > i2c-1. This patch series adds them on all the boards that have them according > to the spec-sheets. > > I explicitly added my personal --Tested-by to boards I actually tested. Testing your changes is the strict minimum before testing your patches. Just like running checkpatch on them, which you clearly failed to do, otherwise you would have seen that this is not the right syntax. Drop the tested-by, fix your SoB. > There are two boards, that according to the sheets have them as well > and physically inspecting the boards shows them clearly, I did not > actually test them on those the boards that are missing the > --Tested-by. Then don't send those patches. Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: