[PATCH v3 1/5] Documentation: add DT bindings for ARM SCPI sensors

[mark.rutland@arm.com (Mark Rutland)]

On Mon, Sep 14, 2015 at 02:00:14PM +0100, Punit Agrawal wrote:
> The System Control Processor (SCP) provides access to SoC sensors via
> the System Control and Power Interface (SCPI) Message Protocol. Add
> bindings to allow probing of these sensors. Also support referencing
> of the sensors for setting up thermal zones via the thermal DT
> bindings.
> 
> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Sudeep Holla <sudeep.holla@arm.com>
> ---
>  Documentation/devicetree/bindings/arm/arm,scpi.txt | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/arm,scpi.txt b/Documentation/devicetree/bindings/arm/arm,scpi.txt
> index f002460..af66f7f 100644
> --- a/Documentation/devicetree/bindings/arm/arm,scpi.txt
> +++ b/Documentation/devicetree/bindings/arm/arm,scpi.txt
> @@ -72,8 +72,18 @@ Required sub-node properties:
>  - compatible : should be "arm,juno-scp-shmem" for Non-secure SRAM based
>  	       shared memory on Juno platforms
>  
> +Sensor bindings for the sensors based on SCPI Message Protocol
> +--------------------------------------------------------------
> +SCPI provides an API to access the various sensors on the SoC.
> +
> +Required properties:
> +- compatible : should be "arm,scpi-sensors".
> +- #thermal-sensor-cells: should be set to 1. This property follows the
> +			 thermal device tree bindings[2].

You need to specify what the valid values for this cell are.

Mark.

> +
>  [0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html
>  [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +[2] Documentation/devicetree/bindings/thermal/thermal.txt
>  
>  Example:
>  
> @@ -122,6 +132,11 @@ scpi_protocol: scpi at 2e000000 {
>  			clock-output-names = "pxlclk0", "pxlclk1";
>  		};
>  	};
> +
> +	scpi_sensors0: sensors {
> +		compatible = "arm,scpi-sensors";
> +		#thermal-sensor-cells = <1>;
> +	};
>  };
>  
>  cpu at 0 {
> -- 
> 2.5.0
>