From mboxrd@z Thu Jan 1 00:00:00 1970 From: shawnguo@kernel.org (Shawn Guo) Date: Thu, 17 Sep 2015 09:04:16 +0800 Subject: [PATCH] ARM: dts: vfxxx: Add iio_hwmon node for ADC temperature channel In-Reply-To: <20150907084911.GA6877@Sanchayan-Arch.toradex.int> References: <20150906043232.GD30746@tiger> <20150907084911.GA6877@Sanchayan-Arch.toradex.int> Message-ID: <20150917010416.GH30746@tiger> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, Sep 07, 2015 at 02:19:11PM +0530, maitysanchayan at gmail.com wrote: > Hi Shawn, > > On 15-09-06 12:32:32, Shawn Guo wrote: > > On Thu, Aug 06, 2015 at 09:28:22PM +0530, Sanchayan Maity wrote: > > > Add iio_hwmon node to expose the temperature channel on Vybrid > > > as hardware monitor device using the iio_hwmon driver. > > > > > > Signed-off-by: Sanchayan Maity > > > --- > > > arch/arm/boot/dts/vfxxx.dtsi | 5 +++++ > > > 1 file changed, 5 insertions(+) > > > > > > diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi > > > index 39173bb..0993d66 100644 > > > --- a/arch/arm/boot/dts/vfxxx.dtsi > > > +++ b/arch/arm/boot/dts/vfxxx.dtsi > > > @@ -597,5 +597,10 @@ > > > status = "disabled"; > > > }; > > > }; > > > + > > > + iio_hwmon { > > > > Hyphen rather than underscore should be used in node name. > > As per iio-bindings.txt I did this. It is the same in imx23.dtsi and imx28.dtsi. > > http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/iio/iio-bindings.txt#L85 > http://lxr.free-electrons.com/source/arch/arm/boot/dts/imx23.dtsi#L570 > http://lxr.free-electrons.com/source/arch/arm/boot/dts/imx28.dtsi#L1246 Oh, sorry, all these should be caught earlier. > > So should this be changed? Yeah, that would be nice, if the change doesn't break anything. Shawn