From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Tue, 22 Sep 2015 16:29:44 +0200 Subject: [PATCH 2/5] ARM: dts: sun5i: Add PWM channel 0 pinmux setting for A13/A10s In-Reply-To: <1442752251-20744-3-git-send-email-hdegoede@redhat.com> References: <1442752251-20744-1-git-send-email-hdegoede@redhat.com> <1442752251-20744-3-git-send-email-hdegoede@redhat.com> Message-ID: <20150922142944.GD4684@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sun, Sep 20, 2015 at 08:30:48AM -0400, Hans de Goede wrote: > Add a pinmux setting for the first pwm channel. This is often used for > backlight dimming on tablets. > > Signed-off-by: Hans de Goede > --- > arch/arm/boot/dts/sun5i.dtsi | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi > index 5e036a4..f0714d3 100644 > --- a/arch/arm/boot/dts/sun5i.dtsi > +++ b/arch/arm/boot/dts/sun5i.dtsi > @@ -529,6 +529,13 @@ > allwinner,drive = ; > allwinner,pull = ; > }; > + > + pwm0_pins: pwm0 { Is there a reason why you call this pinset pwm0, while it looks like there's a single pwm controller? Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: