[PATCH 0/5] Add Marvell berlin4ct clk support

[jszhang@marvell.com (Jisheng Zhang)]

+ CLK maintainers

sorry, yesterday I pressed ENTER quickly before --to list is completed

On Tue, 22 Sep 2015 22:12:31 +0800
Jisheng Zhang <jszhang@marvell.com> wrote:

> Add berlin4ct clk driver. The berlin4ct SoC contains:
> 
> two kinds of PLL: normal PLL and AVPLL. The normal PLL support is done.
> The AVPLL support is in TODO list.
> 
> two kinds of clk: normal clk and gate clk. The normal clk supports changing
> divider, selecting clock source, disabling/enabling etc. The gate clk only
> supports disabling/enabling. Both are supported in this series.
> 
> Jisheng Zhang (5):
>   clk: berlin: add common pll driver
>   clk: berlin: add common clk driver for newer SoCs
>   clk: berlin: add clk support for berlin4ct
>   dt-bindings: add binding for marvell berlin4ct SoC
>   arm64: dts: berlin4ct: add pll and clock nodes
> 
>  .../bindings/clock/marvell,berlin4ct.txt           |  38 +++++
>  arch/arm64/boot/dts/marvell/berlin4ct.dtsi         |  38 +++++
>  drivers/clk/berlin/Makefile                        |   2 +-
>  drivers/clk/berlin/clk-berlin4ct.c                 | 164 +++++++++++++++++++++
>  drivers/clk/berlin/clk.c                           | 147 ++++++++++++++++++
>  drivers/clk/berlin/clk.h                           |  38 +++++
>  drivers/clk/berlin/pll.c                           | 119 +++++++++++++++
>  include/dt-bindings/clock/berlin4ct.h              |  56 +++++++
>  8 files changed, 601 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/clock/marvell,berlin4ct.txt
>  create mode 100644 drivers/clk/berlin/clk-berlin4ct.c
>  create mode 100644 drivers/clk/berlin/clk.c
>  create mode 100644 drivers/clk/berlin/clk.h
>  create mode 100644 drivers/clk/berlin/pll.c
>  create mode 100644 include/dt-bindings/clock/berlin4ct.h
>