From: agross@codeaurora.org (Andy Gross)
To: linux-arm-kernel@lists.infradead.org
Subject: [Patch v2 06/10] regulators: qcom-smd: Add PM8916 support
Date: Wed, 23 Sep 2015 13:14:54 -0500 [thread overview]
Message-ID: <20150923181454.GA24756@qualcomm.com> (raw)
In-Reply-To: <20150923172358.GE24668@usrtlx11787.corpusers.net>
On Wed, Sep 23, 2015 at 10:23:58AM -0700, Bjorn Andersson wrote:
> On Wed 23 Sep 09:53 PDT 2015, Andy Gross wrote:
>
> > This patch adds support and documentation for the PM8916 regulators
> > found on MSM8916 platforms.
> >
> > Signed-off-by: Andy Gross <agross@codeaurora.org>
> > ---
> > .../bindings/soc/qcom/qcom,smd-rpm-regulator.txt | 18 ++++++
> > drivers/regulator/qcom_smd-regulator.c | 64 ++++++++++++++++++++
> > 2 files changed, 82 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt
> > index 7084474..05dfc1a 100644
> > --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt
> > +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt
> > @@ -18,6 +18,7 @@ Regulator nodes are identified by their compatible:
> > Definition: must be one of:
> > "qcom,rpm-pm8841-regulators"
> > "qcom,rpm-pm8941-regulators"
> > + "qcom,rpm-pm8916-regulators"
>
> Alphabetical please
>
> >
> > - vdd_s1-supply:
> > - vdd_s2-supply:
> > @@ -50,6 +51,19 @@ Regulator nodes are identified by their compatible:
> > Definition: reference to regulator supplying the input pin, as
> > described in the data sheet
> >
> > +- vdd_s1-supply:
> > +- vdd_s2-supply:
> > +- vdd_s3-supply:
> > +- vdd_s4-supply:
> > +- vdd_l1_l2_l3-supply
> > +- vdd_l4_l5_l6-supply
> > +- vdd_l7-supply
>
> End these with ':' as well
>
> > +- vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18-supply:
> > + Usage: optional (pm8916 only)
> > + Value type: <phandle>
> > + Definition: reference to regulator supplying the input pin, as
> > + described in the data sheet
> > +
> [..]
> > diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
> [..]
> > static const struct of_device_id rpm_of_match[] = {
> > + { .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators },
>
> pm8916 > pm8841
>
> > { .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators },
> > { .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators },
> > {}
>
> With these nits:
>
> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
>
> Regards,
> Bjorn
I'll fixup this when I apply it. Thanks!
--
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2015-09-23 18:14 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-23 16:53 [Patch v2 00/10] Add RPM/SMD Support for QCOM platforms Andy Gross
2015-09-23 16:53 ` [Patch v2 01/10] soc: qcom: documentation: Update SMD/RPM Docs Andy Gross
2015-09-23 16:53 ` [Patch v2 02/10] soc: qcom: smd-rpm: Add existing platform support Andy Gross
2015-09-23 17:18 ` Bjorn Andersson
2015-09-23 18:15 ` Andy Gross
2015-09-23 16:53 ` [Patch v2 03/10] arm64: dts: qcom: Add MSM8916 SMEM nodes Andy Gross
2015-09-23 16:53 ` [Patch v2 04/10] arm64: dts: qcom: Add RPM/SMD support on MSM8916 Andy Gross
2015-09-23 16:53 ` [Patch v2 05/10] arm64: dts: Add PM8916 " Andy Gross
2015-09-23 16:53 ` [Patch v2 06/10] regulators: qcom-smd: Add PM8916 support Andy Gross
2015-09-23 17:23 ` Bjorn Andersson
2015-09-23 18:14 ` Andy Gross [this message]
2015-09-23 16:53 ` [Patch v2 07/10] arm: dts: Add APQ8084 SMEM nodes Andy Gross
2015-09-23 16:53 ` [Patch v2 08/10] arm: dts: Add RPM/SMD support on APQ8084 Andy Gross
2015-09-23 16:53 ` [Patch v2 09/10] arm: dts: Add support for PMA8084 " Andy Gross
2015-09-23 16:53 ` [Patch v2 10/10] regulator: qcom-smd: Add support for PMA8084 Andy Gross
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150923181454.GA24756@qualcomm.com \
--to=agross@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).