From mboxrd@z Thu Jan  1 00:00:00 1970
From: shawnguo@kernel.org (Shawn Guo)
Date: Fri, 25 Sep 2015 22:01:54 -0700
Subject: [PATCH] ARM: dts: imx7d: Fix UART2 base address
In-Reply-To: <1443122292-29385-1-git-send-email-festevam@gmail.com>
References: <1443122292-29385-1-git-send-email-festevam@gmail.com>
Message-ID: <20150926050154.GF3529@tiger>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Thu, Sep 24, 2015 at 04:18:12PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> The UART2 memory space starts at address 0x30890000 (UART2_URXD).
> 
> Fix it so that UART2 can be used.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

Frank, can you confirm it?

Shawn

> ---
>  arch/arm/boot/dts/imx7d.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
> index 15c2193..9569d0a 100644
> --- a/arch/arm/boot/dts/imx7d.dtsi
> +++ b/arch/arm/boot/dts/imx7d.dtsi
> @@ -640,10 +640,10 @@
>  				status = "disabled";
>  			};
>  
> -			uart2: serial at 30870000 {
> +			uart2: serial at 30890000 {
>  				compatible = "fsl,imx7d-uart",
>  					     "fsl,imx6q-uart";
> -				reg = <0x30870000 0x10000>;
> +				reg = <0x30890000 0x10000>;
>  				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
>  				clocks = <&clks IMX7D_UART2_ROOT_CLK>,
>  					<&clks IMX7D_UART2_ROOT_CLK>;
> -- 
> 1.9.1
>