From mboxrd@z Thu Jan 1 00:00:00 1970 From: lorenzo.pieralisi@arm.com (Lorenzo Pieralisi) Date: Tue, 29 Sep 2015 12:05:27 +0100 Subject: [PATCH v3 1/7] acpi: Add early device probing infrastructure In-Reply-To: <1443451758-22717-2-git-send-email-marc.zyngier@arm.com> References: <1443451758-22717-1-git-send-email-marc.zyngier@arm.com> <1443451758-22717-2-git-send-email-marc.zyngier@arm.com> Message-ID: <20150929110527.GB17577@red-moon> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, Sep 28, 2015 at 03:49:12PM +0100, Marc Zyngier wrote: > IRQ controllers and timers are the two types of device the kernel > requires before being able to use the device driver model. > > ACPI so far lacks a proper probing infrastructure similar to the one > we have with DT, where we're able to declare IRQ chips and > clocksources inside the driver code, and let the core code pick it up > and call us back on a match. This leads to all kind of really ugly > hacks all over the arm64 code and even in the ACPI layer. > > In order to allow some basic probing based on the ACPI tables, > introduce "struct acpi_probe_entry" which contains just enough > data and callbacks to match a table, an optional subtable, and > call a probe function. A driver can, at build time, register itself > and expect being called if the right entry exists in the ACPI > table. > > A acpi_probe_device_table() is provided, taking an identifier for > a set of acpi_prove_entries, and iterating over the registered > entries. > > Signed-off-by: Marc Zyngier > --- > drivers/acpi/scan.c | 39 +++++++++++++++++++++++ > include/asm-generic/vmlinux.lds.h | 10 ++++++ > include/linux/acpi.h | 66 +++++++++++++++++++++++++++++++++++++++ Reviewed-by: Lorenzo Pieralisi