[PATCH v15 1/2] arm:dts:ls1021a: Add DCU dts node

[PATCH v15 1/2] arm:dts:ls1021a: Add DCU dts node

[Jianwei Wang]

Add DCU node, DCU is a display controller of Freescale
named 2D-ACE.

Signed-off-by: Alison Wang <b18965@freescale.com>
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com>
---
 arch/arm/boot/dts/ls1021a.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index c70bb27..6d6e3e2 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -383,6 +383,16 @@
 				 <&platform_clk 1>;
 		};
 
+		dcu: dcu at 2ce0000 {
+			compatible = "fsl,ls1021a-dcu";
+			reg = <0x0 0x2ce0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&platform_clk 0>;
+			clock-names = "dcu";
+			big-endian;
+			status = "disabled";
+		};
+
 		mdio0: mdio at 2d24000 {
 			compatible = "gianfar";
 			device_type = "mdio";
-- 
2.1.0.27.g96db324

[PATCH v15 2/2] arm:dts:ls1021a: Add a TFT LCD panel dts node

[Jianwei Wang]

Add a TFT LCD panel. the TFT LCD panel is WQVGA "480x272",
and the bpp is 24.

Signed-off-by: Alison Wang <b18965@freescale.com>
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com>
---

Changed in V15:
Rename compatible string.

 arch/arm/boot/dts/ls1021a-twr.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index a2c591e..99c6aad 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -56,6 +56,17 @@
 		enet0_sgmii_phy = &sgmii_phy2;
 		enet1_sgmii_phy = &sgmii_phy0;
 	};
+
+	panel: panel {
+		compatible = "nec,nl4827hc19-05b";
+	};
+
+};
+
+&dcu {
+	fsl,panel = <&panel>;
+	status = "okay";
+
 };
 
 &dspi1 {
-- 
2.1.0.27.g96db324

[PATCH v15 1/2] arm:dts:ls1021a: Add DCU dts node

[Shawn Guo]

On Thu, Aug 27, 2015 at 02:13:46PM +0800, Jianwei Wang wrote:
> Add DCU node, DCU is a display controller of Freescale
> named 2D-ACE.
> 
> Signed-off-by: Alison Wang <b18965@freescale.com>
> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com>

MAINTAINERS file has been updated for a couple of release cycles.
Please stop using shawn.guo at linaro.org, and resend to
shawnguo at kernel.org instead.

Shawn

> ---
>  arch/arm/boot/dts/ls1021a.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
> index c70bb27..6d6e3e2 100644
> --- a/arch/arm/boot/dts/ls1021a.dtsi
> +++ b/arch/arm/boot/dts/ls1021a.dtsi
> @@ -383,6 +383,16 @@
>  				 <&platform_clk 1>;
>  		};
>  
> +		dcu: dcu at 2ce0000 {
> +			compatible = "fsl,ls1021a-dcu";
> +			reg = <0x0 0x2ce0000 0x0 0x10000>;
> +			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&platform_clk 0>;
> +			clock-names = "dcu";
> +			big-endian;
> +			status = "disabled";
> +		};
> +
>  		mdio0: mdio at 2d24000 {
>  			compatible = "gianfar";
>  			device_type = "mdio";
> -- 
> 2.1.0.27.g96db324
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

[PATCH v15 1/2] arm:dts:ls1021a: Add DCU dts node

[Shawn Guo]

On Thu, Aug 27, 2015 at 02:13:46PM +0800, Jianwei Wang wrote:
> Add DCU node, DCU is a display controller of Freescale
> named 2D-ACE.
> 
> Signed-off-by: Alison Wang <b18965@freescale.com>
> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com>

When you resend, please use "ARM: dts: ls1021a: ..." as subject prefix.

Shawn