[PATCH v3 0/9] ARM: dts: update Boundary Devices boards support

[shawnguo@kernel.org (Shawn Guo)]

On Wed, Sep 09, 2015 at 02:30:44PM +0200, Gary Bisson wrote:
> Hi all,
> 
> This series is a follow-up to the previous series that added LCD display
> support.
> http://lists.infradead.org/pipermail/linux-arm-kernel/2015-August/364425.html

The MAINTAINERS file has been updated for a couple of release cycles
with my new email address.  Please stop sending patches to
shawn.guo at linaro.org, and resend any patches you want me to collect to
shawnguo at kernel.org.

Shawn

> 
> This one aims at adding touchscreen and WiFi support for Nitrogen6x as well as
> adding two boards: Nitrogen6_Max and Nit6xlite.
> 
> It also takes care of updating the licenses to be GPLv2/X11.
> 
> The series has been tested against linux-next tag next-20150909.
> 
> Note that imx_v6_v7_defconfig has been used with the following additions:
> CONFIG_TOUCHSCREEN_EDT_FT5X06=y
> CONFIG_I2C_MUX_GPIO=y
> CONFIG_RTC_DRV_M41T80=y
> 
> Modifications:
> v2->v3:
> - Rename nodes to general class of device as suggested by Philipp and Russell.
> - Remove useless wakeup-gpio field for edt,ft5x06 touchscreen
> - Add missing muxing for interrupt GPIO
> - Rebased on next-20150909
> v1->v2:
> - Add Boundary Devices Inc. to vendor prefixes
> - Relicense devices trees to GPLv2/X11 as suggested by Fabio for:
>   - Nitrogen6x
>   - SabreLite
>   - Nit6xLite
>   - Nitrogen6_MAX
> - Change manufacturer to Boundary Devices as suggested by Fabio for:
>   - Nitrogen6x
>   - Nit6xLite
>   - Nitrogen6_MAX
> - Fixed missing macros for gpio/irq values as suggested by Philipp.
> - Rebased on next-20150908
> 
> Regards,
> Gary
> 
> Gary Bisson (9):
>   ARM: dts: imx6dql-nitrogen6x: add touchscreen support
>   ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support
>   ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11
>   ARM: dts: imx6qdl-sabrelite: relicense under GPLv2/X11
>   of: Add Boundary Devices Inc. vendor prefix
>   ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices
>   ARM: dts: imx6dl-nitrogen6x: change manufacturer to Boundary Devices
>   ARM: dts: imx: add Boundary Devices Nitrogen6_Max board
>   ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board
> 
>  .../devicetree/bindings/vendor-prefixes.txt        |   1 +
>  arch/arm/boot/dts/Makefile                         |   2 +
>  arch/arm/boot/dts/imx6dl-nit6xlite.dts             |  49 ++
>  arch/arm/boot/dts/imx6dl-nitrogen6x.dts            |  44 +-
>  arch/arm/boot/dts/imx6dl-sabrelite.dts             |  40 +-
>  arch/arm/boot/dts/imx6q-nitrogen6_max.dts          |  53 ++
>  arch/arm/boot/dts/imx6q-nitrogen6x.dts             |  44 +-
>  arch/arm/boot/dts/imx6q-sabrelite.dts              |  40 +-
>  ...6qdl-nitrogen6x.dtsi => imx6qdl-nit6xlite.dtsi} | 396 ++++++----
>  arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi       | 873 +++++++++++++++++++++
>  arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi          | 111 ++-
>  arch/arm/boot/dts/imx6qdl-sabrelite.dtsi           |  40 +-
>  12 files changed, 1523 insertions(+), 170 deletions(-)
>  create mode 100644 arch/arm/boot/dts/imx6dl-nit6xlite.dts
>  create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_max.dts
>  copy arch/arm/boot/dts/{imx6qdl-nitrogen6x.dtsi => imx6qdl-nit6xlite.dtsi} (50%)
>  create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
> 
> -- 
> 2.5.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>