[linux-sunxi] Re: [PATCH 2/6] ARM: dts: sun7i: Enable USB DRC on Bananapi

[maxime.ripard@free-electrons.com (Maxime Ripard)]

Hi,

On Tue, Sep 29, 2015 at 10:26:37AM +0200, Hans de Goede wrote:
> Hi,
> 
> On 29-09-15 10:04, Maxime Ripard wrote:
> >On Tue, Sep 22, 2015 at 03:36:01PM +0200, Hans de Goede wrote:
> >>Enable the otg/drc usb controller on the Bananapi.
> >>
> >>Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> >
> >Applied all the other patches but this one.
> 
> Thanks, seems you did not push this to your git.kernel.org repo though ?

I think I did, but maybe not at the time you sent the mail.

> >Since we dropped the patch adding the regulators support on the
> >Bananapi until we figure out why the board crash, it doesn't compile
> >anymore.
> 
> How about me doing a v2 of the regulators patch which removes the
> 
> &cpu0 {
>         cpu-supply = <&reg_dcdc2>;
> };
> 
> So that we do not get cpu voltage scaling, then the regulator
> changes should be a NOP, everything should just keep the u-boot
> set voltages, and we can enable oth support.
> 
> And then when we've figured out a safe way to enable cpu voltage
> scaling we can do so with a follow up patch ?
> 
> Is that a plan ? If so say yes and I'll do a v2 of these patches :)

Yep, it sounds like a good plan :)

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151001/f0ed65c4/attachment-0001.sig>