[PATCH 3/3] hwrng: st: Use real-world device timings for timeout

[linux@arm.linux.org.uk (Russell King - ARM Linux)]

On Tue, Oct 06, 2015 at 03:44:00PM +0100, Lee Jones wrote:
> Samples are documented to be available every 0.667us, so in theory
> the 8 sample deep FIFO should take 5.336us to fill.  However, during
> thorough testing, it became apparent that filling the FIFO actually
> takes closer to 12us.

Is that measured?

> +/*
> + * Samples are documented to be available every 0.667us, so in theory
> + * the 8 sample deep FIFO should take 5.336us to fill.  However, during
> + * thorough testing, it became apparent that filling the FIFO actually
> + * takes closer to 12us.
> + */
> +#define ST_RNG_FILL_FIFO_TIMEOUT	12

I hope you're not using such a precise figure with udelay().  udelay()
is not guaranteed to give exactly (or even at least) the delay you
request.  It's defined to give an approximate delay.

Many people have a problem understanding that, so I won't explain why
it is that way, just accept that it is and move on... it's not going
to magically get "fixed" because someone has just learnt about this. :)

-- 
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.