From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Sun, 11 Oct 2015 18:45:02 +0200 Subject: [PATCH v3] ARM: dts: sunxi: Add regulators for LeMaker BananaPi In-Reply-To: <1444256316-2278-1-git-send-email-public_timo.s@silentcreek.de> References: <1444256316-2278-1-git-send-email-public_timo.s@silentcreek.de> Message-ID: <20151011164502.GM2278@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thu, Oct 08, 2015 at 12:18:36AM +0200, Timo Sigurdsson wrote: > sun7i-a20-bananapi.dts doesn't contain regulator nodes for the AXP209 PMU > driver, so add them to allow for voltage-scaling with cpufreq-dt. Also > add board-specific OPP to use slightly higher voltages at lower > frequencies since Kevin Hilman reported that not all BananaPi boards run > stable at the default voltages inherited by sun7i-a20.dtsi. > > Signed-off-by: Timo Sigurdsson Applied, thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: