[PATCH 2/2] arm: mvebu: reorder nodes under internal-regs by address in RN2120 .dts file

[andrew@lunn.ch (Andrew Lunn)]

On Sat, Oct 10, 2015 at 12:10:39AM +0200, Arnaud Ebalard wrote:
> 
> This cosmetic patch reorder nodes under internal-regs by increasing
> address order, as epxected.

expected.

Gregory, can you fix that as you commit?

Acked-by: Andrew Lunn <andrew@lunn.ch>

	  Andrew

> 
> Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
> ---
>  arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 86 +++++++++++++-------------
>  1 file changed, 43 insertions(+), 43 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
> index 85b2f87c0b8a..d72a69d97ba2 100644
> --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
> +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
> @@ -94,54 +94,11 @@
>  				status = "disabled";
>  			};
>  
> -			/* Two rear eSATA ports */
> -			sata at a0000 {
> -				nr-ports = <2>;
> -				status = "okay";
> -			};
> -
> -			serial at 12000 {
> -				status = "okay";
> -			};
> -
> -			mdio {
> -				phy0: ethernet-phy at 0 { /* Marvell 88E1318 */
> -					reg = <0>;
> -				};
> -
> -				phy1: ethernet-phy at 1 { /* Marvell 88E1318 */
> -					reg = <1>;
> -				};
> -			};
> -
> -			ethernet at 70000 {
> -				status = "okay";
> -				phy = <&phy0>;
> -				phy-mode = "rgmii-id";
> -			};
> -
> -			ethernet at 74000 {
> -				status = "okay";
> -				phy = <&phy1>;
> -				phy-mode = "rgmii-id";
> -			};
> -
> -			/* Front USB 2.0 port */
> -			usb at 50000 {
> -				status = "okay";
> -			};
> -
>  			i2c at 11000 {
>  				compatible = "marvell,mv64xxx-i2c";
>  				clock-frequency = <400000>;
>  				status = "okay";
>  
> -				isl12057: isl12057 at 68 {
> -					compatible = "isil,isl12057";
> -					reg = <0x68>;
> -					isil,irq2-can-wakeup-machine;
> -				};
> -
>  				/* Controller for rear fan #1 of 3 (Protechnic
>  				 * MGT4012XB-O20, 8000RPM) near eSATA port */
>  				g762_fan1: g762 at 3e {
> @@ -178,6 +135,49 @@
>  					compatible = "gmt,g751";
>  					reg = <0x4c>;
>  				};
> +
> +				isl12057: isl12057 at 68 {
> +					compatible = "isil,isl12057";
> +					reg = <0x68>;
> +					isil,irq2-can-wakeup-machine;
> +				};
> +			};
> +
> +			serial at 12000 {
> +				status = "okay";
> +			};
> +
> +			/* Front USB 2.0 port */
> +			usb at 50000 {
> +				status = "okay";
> +			};
> +
> +			mdio {
> +				phy0: ethernet-phy at 0 { /* Marvell 88E1318 */
> +					reg = <0>;
> +				};
> +
> +				phy1: ethernet-phy at 1 { /* Marvell 88E1318 */
> +					reg = <1>;
> +				};
> +			};
> +
> +			ethernet at 70000 {
> +				status = "okay";
> +				phy = <&phy0>;
> +				phy-mode = "rgmii-id";
> +			};
> +
> +			ethernet at 74000 {
> +				status = "okay";
> +				phy = <&phy1>;
> +				phy-mode = "rgmii-id";
> +			};
> +
> +			/* Two rear eSATA ports */
> +			sata at a0000 {
> +				nr-ports = <2>;
> +				status = "okay";
>  			};
>  
>  			nand at d0000 {
> -- 
> 2.5.3
>