From mboxrd@z Thu Jan  1 00:00:00 1970
From: lee.jones@linaro.org (Lee Jones)
Date: Tue, 13 Oct 2015 11:07:05 +0100
Subject: [PATCH v2 1/3] mfd: documentation: dt: Document grounded ACOKB
 pin on S2MPS11
In-Reply-To: <02a201d0d676$2fbe73c0$8f3b5b40$@kernel.org>
References: <1439287746-14034-1-git-send-email-k.kozlowski.k@gmail.com>
 <1439287746-14034-2-git-send-email-k.kozlowski.k@gmail.com>
 <02a201d0d676$2fbe73c0$8f3b5b40$@kernel.org>
Message-ID: <20151013100705.GY32409@x1>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Fri, 14 Aug 2015, Kukjin Kim wrote:

> Krzysztof Kozlowski wrote:
> > 
> > Document a new Device Tree property 'samsung,s2mps11-acokb-ground'
> > indicating that ACOKB pin of S2MPS11 PMIC is connected to the ground so
> > the PMIC must manually set PWRHOLD bit in CTRL1 register to turn off the
> > power.
> > 
> > Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
> > Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
> > Acked-by: Lee Jones <lee.jones@linaro.org>
> > 
> > ---
> > 
> > Changes since v1:
> > 1. Split bindings documentation to separate patch (suggested by Lee).
> > 2. Add Javier's reviewed-by and Lee's acked-by.
> > ---
> >  Documentation/devicetree/bindings/mfd/s2mps11.txt | 4 ++++
> >  1 file changed, 4 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt
> > b/Documentation/devicetree/bindings/mfd/s2mps11.txt
> > index 57a045016fca..90eaef393325 100644
> > --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
> > +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
> > @@ -15,6 +15,10 @@ Optional properties:
> >  - interrupt-parent: Specifies the phandle of the interrupt controller to which
> >    the interrupts from s2mps11 are delivered to.
> >  - interrupts: Interrupt specifiers for interrupt sources.
> > +- samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is
> > +  connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1
> > +  register to turn off the power. Usually the ACOKB is pulled up to VBATT so
> > +  when PWRHOLD pin goes low, the rising ACOKB will trigger power off.
> > 
> >  Optional nodes:
> >  - clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768
> 
> Applied 1/3 and 3/3.

Any chance you applied these on their own branch (which can be
tagged)?

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog