[PATCH 0/4] ARM: berlin: improve multi_v7_defconfig support

[PATCH 0/4] ARM: berlin: improve multi_v7_defconfig support

[Antoine Tenart]

Hi all,

Some drivers used on a Marvell Berlin kernel were missing from
multi_v7_defconfig. This series add them.

Antoine

Antoine Tenart (4):
  ARM: multi_v7_defconfig: enable Berlin SATA PHY
  ARM: multi_v7_defconfig: enable Berlin USB PHY
  ARM: multi_v7_defconfig: enable pxa168 Ethernet
  ARM: multi_v7_defconfig: enable the Berlin ADC

 arch/arm/configs/multi_v7_defconfig | 4 ++++
 1 file changed, 4 insertions(+)

-- 
2.6.1

[PATCH 1/4] ARM: multi_v7_defconfig: enable Berlin SATA PHY

[Antoine Tenart]

This PHY is required to have the SATA controller working on Berlin
and is missing from multi_v7_defconfig. Enable it.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 03deb7fb35e8..94d75e81ca19 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -651,6 +651,7 @@ CONFIG_PHY_HIX5HD2_SATA=y
 CONFIG_PWM_STI=m
 CONFIG_OMAP_USB2=y
 CONFIG_TI_PIPE3=y
+CONFIG_PHY_BERLIN_SATA=y
 CONFIG_PHY_MIPHY28LP=y
 CONFIG_PHY_MIPHY365X=y
 CONFIG_PHY_RCAR_GEN2=m
-- 
2.6.1

[PATCH 2/4] ARM: multi_v7_defconfig: enable Berlin USB PHY

[Antoine Tenart]

This PHY is required to have the USB controller working on Berlin
and is missing from multi_v7_defconfig. Enable it.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 94d75e81ca19..2f8984618236 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -651,6 +651,7 @@ CONFIG_PHY_HIX5HD2_SATA=y
 CONFIG_PWM_STI=m
 CONFIG_OMAP_USB2=y
 CONFIG_TI_PIPE3=y
+CONFIG_PHY_BERLIN_USB=y
 CONFIG_PHY_BERLIN_SATA=y
 CONFIG_PHY_MIPHY28LP=y
 CONFIG_PHY_MIPHY365X=y
-- 
2.6.1

[PATCH 3/4] ARM: multi_v7_defconfig: enable pxa168 Ethernet

[Antoine Tenart]

The Marvell pxa168 ethernet controller is used on Berlin SoCs and is
missing from multi_v7_defconfig. Enable it.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 2f8984618236..e45f80df403c 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -207,6 +207,7 @@ CONFIG_NET_CALXEDA_XGMAC=y
 CONFIG_IGB=y
 CONFIG_MV643XX_ETH=y
 CONFIG_MVNETA=y
+CONFIG_PXA168_ETH=y
 CONFIG_KS8851=y
 CONFIG_R8169=y
 CONFIG_SH_ETH=y
-- 
2.6.1

[PATCH 4/4] ARM: multi_v7_defconfig: enable the Berlin ADC

[Antoine Tenart]

Enable the Marvell Berlin ADC support in multi_v7_defconfig.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index e45f80df403c..2d5c77286a2a 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -637,6 +637,7 @@ CONFIG_EXTCON=y
 CONFIG_TI_AEMIF=y
 CONFIG_IIO=y
 CONFIG_AT91_ADC=m
+CONFIG_BERLIN2_ADC=y
 CONFIG_EXYNOS_ADC=m
 CONFIG_XILINX_XADC=y
 CONFIG_AK8975=y
-- 
2.6.1

[PATCH 0/4] ARM: berlin: improve multi_v7_defconfig support

[Arnd Bergmann]

On Wednesday 14 October 2015 12:34:00 Antoine Tenart wrote:
> Hi all,
> 
> Some drivers used on a Marvell Berlin kernel were missing from
> multi_v7_defconfig. This series add them.

Adding them is great, but we try to have as much as possible
in loadable modules for new additions. Can you do this?

Having a single patch instead of four different ones is fine too,
by the way.

	Arnd

[PATCH 0/4] ARM: berlin: improve multi_v7_defconfig support

[Antoine Tenart]

Hi Arnd,

On Wed, Oct 14, 2015 at 02:36:21PM +0200, Arnd Bergmann wrote:
> On Wednesday 14 October 2015 12:34:00 Antoine Tenart wrote:
> > 
> > Some drivers used on a Marvell Berlin kernel were missing from
> > multi_v7_defconfig. This series add them.
> 
> Adding them is great, but we try to have as much as possible
> in loadable modules for new additions. Can you do this?

Sure, I'll do this for the Ethernet and the ADC drivers. But we already
have the SATA and USB features built-in with multi_v7_defconfig, so I'll
keep the two PHY drivers built-in.

> Having a single patch instead of four different ones is fine too,
> by the way.

And I'll put them into a single patch.

Thanks,

Antoine

-- 
Antoine T?nart, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[PATCH 0/4] ARM: berlin: improve multi_v7_defconfig support

[Arnd Bergmann]

On Wednesday 14 October 2015 15:09:35 Antoine Tenart wrote:
> Hi Arnd,
> 
> On Wed, Oct 14, 2015 at 02:36:21PM +0200, Arnd Bergmann wrote:
> > On Wednesday 14 October 2015 12:34:00 Antoine Tenart wrote:
> > > 
> > > Some drivers used on a Marvell Berlin kernel were missing from
> > > multi_v7_defconfig. This series add them.
> > 
> > Adding them is great, but we try to have as much as possible
> > in loadable modules for new additions. Can you do this?
> 
> Sure, I'll do this for the Ethernet and the ADC drivers. But we already
> have the SATA and USB features built-in with multi_v7_defconfig, so I'll
> keep the two PHY drivers built-in.
> 
> 

Ok, fair enough.

	Arnd