From mboxrd@z Thu Jan  1 00:00:00 1970
From: mark.rutland@arm.com (Mark Rutland)
Date: Fri, 16 Oct 2015 14:04:47 +0100
Subject: [RFC 1/2] Dcumentation: bridge: Add documentation for ps8640 DT
 properties
In-Reply-To: <1444997709-57293-1-git-send-email-ck.hu@mediatek.com>
References: <1444997709-57293-1-git-send-email-ck.hu@mediatek.com>
Message-ID: <20151016130447.GD2054@leverpostej>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Fri, Oct 16, 2015 at 08:15:08PM +0800, CK Hu wrote:
> From: Jitao Shi <jitao.shi@mediatek.com>
> 
> Add documentation for DT properties supported by ps8640
> DSI-eDP converter.
> 
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> ---
>  .../devicetree/bindings/video/bridge/ps8640.txt    |   48 ++++++++++++++++++++
>  1 file changed, 48 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/video/bridge/ps8640.txt
> 
> diff --git a/Documentation/devicetree/bindings/video/bridge/ps8640.txt b/Documentation/devicetree/bindings/video/bridge/ps8640.txt
> new file mode 100644
> index 0000000..450b5df
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/bridge/ps8640.txt
> @@ -0,0 +1,48 @@
> +ps8640-bridge bindings
> +
> +Required properties:
> +	- compatible: "parade,ps8640"
> +	- reg: first i2c address of the bridge

Ther can be multiple addresses?

> +	- power-gpios: OF device-tree gpio specification for power pin.
> +	- reset-gpios: OF device-tree gpio specification for reset pin.
> +	- mode-sel-gpios: OF device-tree gpio specification for mode-sel pin.
> +	- ps8640-1v2-supply: OF device-tree regulator specification for 1v2.
> +	- ps8640-3v3-supply: OF device-tree regulator specification for 3v3.

There's no need for the "ps8640-" prefix on these two. Please drop it.

> +Optional properties:
> +	- video interfaces: Device node can contain video interface port
> +			    nodes for panel according to [1].

Replace this part with:

The device node can contain video interface port nodes per the
video-interfaces binding [1].

Thanks,
Mark.

> +
> +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
> +
> +Example:
> +	edp-bridge at 18 {
> +		compatible = "parade,ps8640";
> +		reg = <0x18>;
> +		power-gpios = <&pio 116 GPIO_ACTIVE_HIGH>;
> +		reset-gpios = <&pio 115 GPIO_ACTIVE_HIGH>;
> +		mode-sel-gpios = <&pio 92 GPIO_ACTIVE_HIGH>;
> +		ps8640-1v2-supply = <&ps8640_fixed_1v2>;
> +		ps8640-3v3-supply = <&mt6397_vgp2_reg>;
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port at 0 {
> +				reg = <0>;
> +
> +				ps8640_in: endpoint {
> +					remote-endpoint = <&dsi0_out>;
> +				};
> +			};
> +
> +			port at 1 {
> +				reg = <1>;
> +
> +				ps8640_out: endpoint {
> +					remote-endpoint = <&panel_in>;
> +				};
> +			};
> +		};
> +	};
> -- 
> 1.7.9.5
>